1953-1979 Ford F-100 Bolt-In Crown Victoria Front Suspension Kit

This bolt in kit is designed to mount the 2003-2011 Crown Victoria front suspension to trucks with 34” outside to outside frame rails. It does not require welding, only drilling holes. It stiffens the factory frame where the crossmember mounts and ties the Crown Victoria suspension securely to your frame. This kit contains all brackets and hardware necessary for install. You will need to cut/grind away your old front suspension brackets. NOTE: CV width: WMS to WMS (Wheel Mounting Surface) 66.9" Minimum wheel size 16" Modern offset wheels required, 5 on 4.5" lug pattern Not compatible with lower control arms with 20mm shoulder on stud. click here for our article with all the crown Vic info     INSTALL GUIDE Install Notes: Install this kit by first cutting all old bracketry out of the way.  Also pop out the factory assembly/alignment pins from the CV crossmember. Then place the crown Vic suspension under your frame and check wheel/fender alignment. Once you are happy with wheel placement