GE AKCQ10ACJ 24" Built-In Thru-the-Wall Air Conditioner with 3-speed Fan, Large LCD Display, Infrared Remote Control, and Cooling Capacity of 10,000 BTU, 10.6 EER, R32, 115v/1ph

The GE AKCQ10ACJ 24" Built-In Thru-the-Wall Air Conditioner delivers 10,000 BTU of cooling power with a 10.6 EER, making it an efficient choice for medium-sized spaces. It features a 3-speed fan, a large LCD display, and an infrared remote control for easy operation. Designed with convenience in mind, it includes a 6-way airflow system, an easy-access washable filter, and energy-saving functions like an on/off timer, sleep mode, and auto fan. The unit operates on 115V/60Hz and uses eco-friendly R32 refrigerant. With a fixed chassis design, top vent/air exchange exhaust, and optional grill compatibility, it's a reliable and efficient cooling solution.Features:Cooling Capacity (Max): 10,000 BTU (providing robust cooling power for rooms up to 450 sq. ft., depending on insulation and room conditions). Cooling Capacity (Min): 9,800 BTU (ensures optimal cooling even in mild conditions). Energy Efficiency Ratio (EER): 10.6 – measures the cooling efficiency of the unit. A higher EER translates into more cooling power for each watt of energy consumed. Annual Operating Cost: $102 (estimated based on average usage and local energy rates). Dehumidification: 3.0 pints per hour – helps to remove excess moisture from the air, reducing humidity levels and improving indoor comfort. 6-Way Adjustable Louvers: The unit comes with 6-way louvers to direct airflow precisely where you need it, allowing you to customize your cooling experience. CEER (Combined Energy Efficiency Ratio): 9.6 – an important measure that combines the energy efficiency of cooling and heating functions. Cooling Amps: 9.0 A for reliable and safe electrical operation. Overall 24" Width: This is the horizontal measurement of the unit. It indicates how wide the air conditioner is, which is crucial for ensuring that it fits snugly into the wall sleeve or cutout. A proper width match ensures there are no gaps that could affect the unit's stability or aesthetic integration into your space. Overall 15" Height: The vertical dimension of the unit. This height is important for confirming that the air conditioner will fit within the allocated wall space, especially in installations with limited height. It also contributes to the unit’s overall appearance when built into the wall. Overall 19" Depth: This measurement represents the front-to-back dimension of the unit. The depth affects how far the unit protrudes into the room and ensures that there is sufficient space behind the unit for wiring and ventilation. A 19-inch depth is typical for built-in models, balancing performance with a streamlined profile. 21" Depth to Louvers: This measurement extends beyond the overall depth to include the distance from the back of the unit to the outer edge of the louvers. The extra 2 inches (21 inches vs. 19 inches) ensures that there is adequate space for air to flow freely through the louvers. This is critical for optimal cooling performance because it prevents the airflow from being obstructed, thereby maximizing the unit’s efficiency and ensuring even distribution of cooled air throughout the room Cutout Dimensions (For Wall Sleeve Installation): Width of 26", the height of 16", and depth of 16" ensures a secure and snug fit in the wall opening. Cooling Watts: 1010 W (provides an efficient balance between power and cooling output). Standby Electrical Consumption: 6 kWh/year – low standby power consumption when the unit is not in active use. Refrigerant Type: R32 refrigerant a more environmentally friendly with lower global warming potential compared to traditional refrigerants like R22. Rotary Compressor: The unit is equipped with a rotary compressor, known for its quiet and efficient cooling operation, ensuring reliable performance over time. Permanent Mesh Filter: A rigid, washable, and tilt-out filter that can be easily cleaned, extending the life of the air conditioner and maintaining air quality. Ventilation: The unit features a top exhaust, which ensures that hot air is vented away from the interior space efficiently. High Airflow Performance: 269 CFM provides maximum air circulation for rapid cooling.) Medium Airflow Performance: 234 CFM provides balanced airflow for moderate cooling needs.) Low Airflow Performance: 203 CFM provides quiet and efficient operation for maintaining a comfortable temperature.) 6-Way Adjustable Louvers: It allows precise airflow direction customization, enhancing cooling efficiency based on room layout and provides better air distribution, preventing hot or cold spots.