GEPRC GEP-Mark4-10 429mm Wheelbase 10 Inch FPV Drone Frame

Summary GEP-Mark-10 is a frame designed to manage heavy-loads flights. It can carries a maximum payload of 3kg when applied with a 3214 or 3115 900KV motor. The light-design structure enables immediate response even when flying with extra weight. The FC fixing hole size is 30.5×30.5mm(M3), Camera lens fixing hole size is19x19mm(M2), Motor fixing hole size is 19x19mm(M3). Reserved enough space for VTX installation at the end of the frame, and the extended dimension frame can mount up to LiPo 6S 8000mah battery. Feature The extended dimension frame leaves enough space to accommodate the large-capacity battery and increases flight time.  Equipped with the vertical-shaped reinforce arm to enhance stabilization and reduce the impact of unsteady on the gyroscope.  The 3.7mm thickness arm structure ensures the rigidity of the frame.  Adopting the 30 mm Aluminum standoff leaves sufficient stacking space.  It supports three types of fixing hole size of VTX : 30.5×30.5mm(M3)、25.5×25.5mm(M2)、20x20mm(M2). Specification Item: GEP-Mark4-10 Frame Dimension: 376mmx303mm Motor to motor：429mm Top plate: 2mm Base plate: 3mm Side plate: 2.5mm Arm plate: 7mm Midplate：3mm Arm bar：3mm Camera fixing hole size: 19x19mm(M2) Motor fixing hole size: 19x19mm（M3） FC fixing hole size: 30.5×30.5mm（M3 VTX fixing hole size: 30.5×30.5mm（M3）/25.5×25.5mm（M2）/20x20mm（M2） Weight: 270.0g Includes 1x GEP-Mark4-10 Frame 1x M20*300mm battery strap 1x Battery Silicone anti-slip Pad 4x EVA landing Pads   Details GEPRC GEP-Mark4-10 frame features large payload, strong structure, and lightweight design. The GEPRC GEP-Mark4-10 is a 429mm wheelbase FPV drone frame with an H-shaped design. It measures 376mm x 303mm, featuring various plate thicknesses (bottom: 3mm, top: 2mm, camera side: 2.5mm, midplate: 3mm) and arm thickness of 7mm. Fixing hole sizes include FC (30.5x30.5mm M3), VTX (30.5x30.5mm M3, 25.5x25.5mm M2, 20x20mm M2), and motor (19x19mm M3). The fuselage space height is 30mm, and the weight is 270±5g. GEPRC GEP-Mark4-10 drone frame has a lengthened fuselage, reinforced bars, and 30mm aluminum pillars. It supports three VTV fixing hole sizes. Recommended components include GEP-F405-HD V2, RAD VTX, LiPo battery, GEP-BL60A-4IN1 ESC, EM3115 motor, and Gemfan propeller. GEPRC GEP-Mark4-10 429mm Wheelbase 10 Inch FPV Drone Frame with reinforced arms ensures rigidity and minimizes lateral swaying noise. The GEPRC GEP-Mark4-10 FPV drone frame has a wheelbase of 428mm, overall dimensions of 376mm x 303mm, motor fixing hole size of 19x19mm (M3), FC fixing hole size of 30.5x30.5mm (M3), and camera fixing hole size of 19x19mm (M2). VTX fixing hole sizes: 30.5x30.5mm (M3), 25.5x25.5mm (M2), and 20x20mm (M2).  © rcdrone.top. All rights reserved.