Jumper R1 V2 Mini 2.4Ghz 16CH Receiver D16 Protocol SBUS Signal Tlite XT18S For RC Drone Durable Easy Install Easy To Use

SPECIFICATIONSBrand Name: NoEnName_NullOrigin: Mainland ChinaMaterial: EVARecommend Age: 14+yRecommend Age: 6-12yRecommend Age: 3-6y Binding is the process of uniquely associating receiver to a transmitter/transmitter RF module . A transmitter internal or external RF module can be bound to multiple receivers (not to be used simultaneously).A receiver can only be bound to one RF module.Follow the steps below to finish the binding procedure.Put the transmitter/transmitter RF module into binding modeConnect battery to the receiver while holding the F/S button (hold for more than 6 seconds) on the receiver to enter the binding mode (red and green LEDs constant on). Press "bind" on the transmitter, the RED LED flashing indicates binding successfully. Reboot the receiver and go back to normal Mode of transmitter RF. Green LED constant on indicates linking normally.Color: Bluematerial: PC+metalModel: R1 V2 MiniDimension: 17.2 x 8.8 x 4.5mm (L x W x H)Number of Channels: 16ChOperating Voltage Range: 3.5V-6VOperating Current: 60mA@5VOperating Range: Full rangeDistance: Greater than 2KMCompatibility: radios in D16 modePackage Contents:1 x receiver (with antenna)Only the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. QiWI VISA Mastercaid UNIONL Maestro Bank Transfer WALLET WebMoney Boletol SHIPPING CHOICE Shipping method Courier Shipping Time 7eL DHL Express About 3-10 days Express Shipping Wie EMS Shipping About 20-45 days Standard Shipping (for order over USDS) Registered Air Maillchina postle About 40-60 days packet-only for USA)