12V 100Ah Lithium Deep Cycle Battery

12V 100Ah Lithium Deep Cycle Battery PRODUCT SPECIFICATION Nominal capacity 100Ah Min. capacity 98Ah Nominal energy 1280Wh Combination structure of battery 23140160-4S2P Nominal voltage 12.8V End of discharge voltage 10.8V Standard charge voltage 14.6±0.2V Float charge voltage 13.8V Standard charge current 20A  Recommended charge current ≤100A Allowed Max. charge current 100A Standard discharge current 50A Recommended discharge current ≤100A Allowed Max. discharge current 100A Peak current 250A,10Sec Internal Resistance ≤40mΩ Weight Approx.12.5kg±5% Ex-factory capacity Approx.50% SOC Click here for spec sheet  Battery usage specification When the battery is used alone, it can be used directly. When the battery needs to be used in parallel or in series, each battery shall be fully charged according to the standard charging method before parallel or in series. The maximum series number of batteries shall not exceed two, and the parallel number shall not exceed four.  Transport & StoreWhen long-time storage, the battery SOC is 30% ~ 50% , high-SOC storage will accelerate the battery capacity degradation. The battery needs to be charged every 6 months if out of use. No fall down, no pile up over 10 layers, and keep face up. Warning Battery must be far away from heat source, high voltage, and no exposure in sunshine for a long time. Never throw the battery into water or fire; Never reverse two electrodes when use the battery; Never connect the positive and negative of battery with metal; Never knock, throw or trample the battery; Never disassemble the battery without manufacturer's permission and guidance. Never use mixed with other type of battery; Never mix other batteries of different manufacturers, types and models in using.