LUMINTOP TLF/BLF FW3S Stainless Steel XPL HI 2800LM ANDURIL UI LED EDC Flashlight

  Introduction: The FW3A was designed by Fritz15 and the flashlight forums TLF & BLF.   Brought to life by Lumintop.   A small 18650 triple LED lamp with tail switch and agreat, a compact, ergonomic, feature-packed EDC-style light.   More detail in TLF     More Detail in BLF  Specification: Name LUMINTOP TLF/BLF FW3S 2800LM ANDURIL UI EDC Flashlight Model FW3S ( Stainless Steel FW3A) Emitter:  Three LEDs on a copper DTP MCPCB e.g XP-L HI 3D(NW 5000K) XP-L HI 7A(WW 3300K)  XP-L HI 1A(CW 6500K) Nichia 219C 4000K Luminus SST20 4000K Optic:   Standard TIR optical lens Flux:  ~2800 lm (XP-L Hi) Intensity: ~12 500 cd ANSI throw ~223 m (XP-L Hi) Firmware:  The FW3A uses free software called Andúril,distributed under the terms of the GPL v3. Code is available from http://tiny.cc/TKAnduril User interfaces:  [1] By default the FW3A is set to use SMOOTH RAMPING. Instant access to TURBO mode is also provided. [2] A more conventional STEPPED RAMPING UI is available if you like discrete modes level. You can choose how many steps you want [3] MOMENTARY mode is useful for signaling purposes or rapidly/briefly lighting up targets. To exit this mode, physically disconnect power [4] MUGGLE mode uses a reduced output. [5] It has an electronic LOCKOUT for safety, but acts also as momentary low light.Other functions: Battery check, sunset, beacon tactical strobe, party strobe, bike flasher, candlelight, lightning storm Battery: One flat-top or button-top 18650 cell. Anunprotected cell is recommended. Max. length 66 mm. Cell is not included. Driver: FET+7+1 driver. Low parasitic drain while OFF Body:  Aluminum with hard-coat anodizing Switch:   Electronic tail switch Ingress rating:  Equivalent to IPX7 Weight: Approximately 53 g without cells Size:  25.5 mm Ø head x 92.5 mm length User Manual: FW3A Germany User manual FW3A English User manual  Package included: 1 x LUMINTOP TLF/BLF FW3S XPL HI 2800LM ANDURIL UI LED EDC Flashlight 1 x Clip