Audio-Technica AT-OC9XEB Cartridge

IN STOCK  and ready to ship     The AT-OC9XEB Dual Moving Coil cartridge with bonded elliptical stylus is designed to provide outstanding channel separation. The Pure Copper by Ohno Continuous Casting (PCOCC) coils ensure pure audio transmission and are aligned in a reverse V-shaped formation to exert less pressure on the stylus, thereby minimizing distortion. Audio quality is further enhanced by a rigid aluminum body that reduces resonance, a neodymium magnet and pure iron yoke that increase the magnetic energy, and the bonded elliptical stylus on an aluminum cantilever that accurately tracks the record groove. The cartridge body has been pre-threaded, enabling it to be mounted to a headshell or integral tonearm with just two screws – no nuts required. Specifications Cartridge & Stylus Frequency Response 20-30,000 Hz Channel Separation 25 dB (1 kHz) Vertical Tracking Angle 20° Vertical Tracking Force 1.8-2.2 g (2.0 g standard) Stylus Construction Bonded round shank Recommended Load Impedance Min. 100 ohms (when head amplifier is connected) Coil Impedance 12 ohms (1 kHz) DC Resistance 12 ohms Coil Inductance 25 mH (1 kHz) Output Voltage 0.32 mV (at 1 kHz, 5 cm/sec) Output Channel Balance 1.5 dB (1 kHz) Stylus Shape Elliptical bonded Cantilever Aluminum pipe Static Compliance 20 x 10-6 cm/dyne Dynamic Compliance 9 x 10-6 cm/dyne (100 Hz) Mounting Half-inch Dimensions 17.3 mm (0.68") H × 16.8 mm (0.66") W × 25.7 mm (1.01") D Accessories Included Non-magnetic screwdriver; 2 washers; cartridge installation screws (5 mm × 2, 8 mm × 2, 10 mm x 2, 12 mm x 2); plastic protector; brush Body Material Aluminum Model AT-OC9XEB Mounting Feature Half-inch mount Stylus Curvature Radius 0.3 x 0.7 mil Stylus Size Bonded round shank Terminal Pins Brass Type Dual Moving Coil Weight 7.6 g (0.3 oz) Wire Used for Coil PCOCC Notes Mounting Feature: Threaded bodyNote: moving coil cartridges require receivers or preamps with compatible inputs; their stylus assemblies are not field-replaceable.