Audio-Technica AT-OC9XSL Cartridge

In stock and ready to ship  The AT-OC9XSL Dual Moving Coil cartridge with special line contact stylus is designed to provide outstanding channel separation. The Pure Copper by Ohno Continuous Casting (PCOCC) coils ensure pure audio transmission and are aligned in a reverse V-shaped formation to exert less pressure on the stylus, thereby minimizing distortion. Audio quality is further enhanced by a rigid aluminum body that reduces resonance, a neodymium magnet and premium permendur yoke that dramatically increase the magnetic energy, and the nude special line contact stylus on a boron cantilever that tracks the record groove with ultimate accuracy, delivering rich, full-range audio and high transient response. The cartridge body has been pre-threaded, enabling it to be mounted to a headshell or integral tonearm with just two screws – no nuts required.   Specifications Cartridge & Stylus Frequency Response 20-50,000 Hz Channel Separation 28 dB (1 kHz) Vertical Tracking Angle 20° Vertical Tracking Force 1.8-2.2 g (2.0 g standard) Stylus Construction Nude rectangular shank Recommended Load Impedance Min. 100 ohms (when head amplifier is connected) Coil Impedance 12 ohms (1 kHz) DC Resistance 12 ohms Coil Inductance 25 mH (1 kHz) Output Voltage 0.4 mV (at 1 kHz, 5 cm/sec) Output Channel Balance 0.5 dB (1 kHz) Stylus Shape Special Line Contact Cantilever 0.28 mm diameter nude boron Static Compliance 22 x 10-6 cm/dyne Dynamic Compliance 18 x 10-6 cm/dyne (100 Hz) Mounting Half-inch Cartridge Weight 7.6 g Dimensions 17.3 mm (0.68") H × 16.8 mm (0.66") W × 25.7 mm (1.01") D Accessories Included Non-magnetic screwdriver; 2 washers; cartridge installation screws (5 mm × 2, 8 mm × 2, 10 mm x 2, 12 mm x 2); plastic protector; brush Body Material Aluminum Model AT-OC9XSL Mounting Feature Half-inch mount Stylus Curvature Radius 1.5 x 0.28 mil Stylus Size Nude rectangular shank Terminal Pins Brass Type Dual Moving Coil Weight 7.6 g (0.3 oz) Wire Used for Coil PCOCC Notes Mounting Feature: Threaded bodyNote: moving coil cartridges require receivers or preamps with compatible inputs; their stylus assemblies are not field-replaceable.