Multi Talent 2K UHS Gray Primer Sealer DTM 4:1 Mix Ratio Made in Germany Akemi

innovative, low-solvent, extremely fast drying, high solid 2-component primer  with a 4:1 mixing ratio. 2 in 1 product suitable for use high build or Sealer. Color: Grey - One Gallon with quart Hardener Mainly used on surfaces such as treated steel, treated galvanized steel, treated aluminum, OEM E-coats, body fillers, refinish enamels and fiberglass. Instructions for Use:1. The substrate to be painted must be dry, clean, free of corrosion, grease and mould release agents.2. Carefully dry machine sand the surrounding area of the part to be treated with P180 to P240 and final sand with P320.3. Thoroughly clean using a suitable cleaner, and wipe off the panel surface immediately using a clean dry cloth.4. Aluminium and zinc coated steel or fibre glass must first be coated with  Epoxy Primer.5. Mixing of 4 parts Multi Talent Primer in volume (6 parts in weight) with 1 part of hardener in volume or weight.6. Can be thinned with  reducer- up to 20% for high build applicationor- 45% for sealer” application7. Using a HVLP gun- for high build apply with 1.8 – 2.0 mm nozzle- for “wet-on-wet” apply with a 1.2 – 1.3 mm nozzle8. Apply on the complete area to be coated as following- for high build apply a first light coat followed by 2 full/wet coats- for “wet-on-wet” apply 1 full single coat or 1 light + 1 full. This gives a film thickness of approx. 30 μm9. Allow each coat to flash 3 – 5 minutes and- for high build 10 minutes before baking- for “wet-on-wet” no flash off is necessary10. Pot life is 45 minutes at 20°C/65 RH11. Drying schedule- Air dryhigh build 60 minutes at 20°Cwet-on-wet 5 - 10 minutes at 20°C- Force dry 20 – 30 minutes at 60°C- Short wave IR 10 minutes half power, followed by 10 minutesfull power with a lamp distance of 90 cm12. Sand dry with P400 or P500 National Rule VOC 540 g/l