12 AC Wireless Relay Switches and One Twelve Buttons Transmitter (Model: 0020362)

Package Include:12 x Receiver: S1U-AC1 x Transmitter: CV-121 x User manual Application:This Long distance AC 120V 220V wireless remote control switch kit, with one twelve buttons RF transmitter, and 12 radio receivers with 1 channel 10A relay output.This kit can long range remote control DC and AC equipments, such as light, lamp, electric locks, motor, pump, fans, solenoid valves, etc. Feature:Wireless control, easy to install.Waterproof: The receiver has waterproof case and waterproof connector, it can be installed outdoors.Universal input: Support 110V AC (100V~120V) used in US, Canada, etc, and 220V AC (200V~240V) used in Germany, UK, France, etc.Relay Output: This receiver is dry relay output, it can be used to operate both DC and AC equipment. The output terminals are NO / NC (normally open / normally closed), serving as a switch.The transmitter / remote can control the receiver from any place within a reliable working distance.The wireless RF signal from the transmitter can pass through walls, floors, doors or windows, but it will lose some operating range.The receiver has reverse power protection and over current protection built in.The receiver only works with the selected transmitter which is matched to the receiver.Receiver Parameters:Model No.: S1U-ACOperating Voltage: AC100~240V (110V/120V/220V/240V)Output Type: Dry Relays Output (Normally Open and Normally Closed)Maximum Load Voltage of Relay: 240VAC or 28VDCMaximum Load Current of Relay: 10A / each channelChannel: 1 CHQuiescent Current: ≤6mA2 Selectable Modes: Self-locking, MomentaryWire Range of Terminals: 22-12 AWGWorking Frequency: 433.92 MHzOperating Temperature: -20°C ~ +70°CPCB size: 88mm x 80mm x 18mmCase size: 115mm x 90mm x 55mm Transmitter Parameters:Model No.: 0021022 (CV-12)Channel/Button: 12Button Symbol: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12Operating Voltage: 12V (1 x 23A -12V battery)Operating Current: 15mAOperating Frequency: 433MHzTransmitting Distance: 500m / 1500ft (theoretically)Modulation Mode: ASKOperating Temperature: -20 ° C to +70 ° CUnit Size: 110mm x 50mm x 18mm Matching Transmitters:The receiver can work with different transmitters, such as model CV-12 (500 Meter / 1500 feet range) or CB-12 (1000 Meter / 3000 feet range). Working Range:With a transmitter (such as CV-12) to form a complete set, the maximum working distance can reach 500 meters in an open ground.The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.If you want to have a further working range, you can replace external antenna of the receiver or use a high-power transmitter, such as CB-12 transmitter. Setting different control modes:1) Setting Momentary mode: Press the learning button in the receiver 2 times, signal LED continuously flashes 2 times and then goes off.The operation of Momentary mode with the transmitter CV-12:Press and hold the button 1 on the transmitter: The relay in the receiver 1 is activated, and the connected lamp is turned on.Release the button 1: The relay in the receiver 1 is deactivated, and the connected lamp is turned off.Press and hold the button 2 on the transmitter: The relay in the receiver 2 is activated, and the connected lamp is turned on.Release the button 2: The relay in the receiver 2 is deactivated, and the connected lamp is turned off....Press and hold the button 12 on the transmitter: The relay in the receiver 12 is activated, and the connected lamp is turned on.Release the button 12: The relay in the receiver 12 is deactivated, and the connected lamp is turned off. 2) Setting Self-locking mode: Press the learning button in the receiver 3 times, signal LED continuously flashes 3 times and then goes off.The operation of Self-locking mode with the transmitter CV-12:Press the button 1 on the transmitter: The relay in the receiver 1 is activated, and the connected lamp is turned on.Press the button 1 again: The relay in the receiver 1 is deactivated, and the connected lamp is turned off.Press the button 2 on the transmitter: The relay in the receiver 2 is activated, and the connected lamp is turned on.Press the button 2 again: The relay in the receiver 2 is deactivated, and the connected lamp is turned off....Press the button 12 on the transmitter: The relay in the receiver 12 is activated, and the connected lamp is turned on.Press the button 12 again: The relay in the receiver 12 is deactivated, and the connected lamp is turned off.