2016 Cadillac SRX Smart Key Fob PN: 13598528

This remote features 5 buttons Lock, Unlock, Remote Starter, Panic and Hatch Opener, tested and guaranteed to work. FCC ID: HYQ2AB Replaces Part Number: 13598528 Brand: Avicero Condition: Brand New Aftermarket (No Logo) Programming without a Recognized Transmitter: If there are no currently recognized transmitters available, follow this procedure to program up to eight transmitters. This feature is not available in Canada. The vehicle must be off and all of the transmitters you wish to program must be with you. 1. Insert the vehicle key of the transmitter into the key lock cylinder on the driver door handle and turn the key, counterclockwise, to the unlock position five times within 10 seconds. The Driver Information Center (DIC) displays REMOTE LEARN PENDING, PLEASE WAIT. 2. Wait for 10 minutes until the DIC displays PRESS ENGINE START BUTTON TO LEARN and then press the ENGINE START/STOP button. The DIC displays will again show REMOTE LEARN PENDING, PLEASE WAIT. 3. Repeat Step 2 two additional times. After the third time all previously known transmitters will no longer work with the vehicle. Remaining transmitters can be relearned during the next steps. The DIC display should now snow READY FOR REMOTE #1 4. Place the new transmitter into the transmitter pocket. The transmitter pocket is inside the center console storage area between the driver and front passenger seats. The storage area will need to be opened and the storage tray lifted up to access the transmitter pocket. 5. Press the ENGINE START/STOP button. When the transmitter is learned the DIC display will show that it is ready to program the next transmitter. 6. Remove the transmitter from the transmitter pocket and press the transmitter UNLOCK or LOCK9//9 button. To program additional transmitters, repeat steps 4-6. When all additional transmitters are programmed, press and hold the ENGINE START/STOP button for 12 seconds to exit programming mode. Programming with a Recognized Transmitter: To program, the vehicle must be off and all of the transmitters, both currently recognized and new, must be with you. 1. Place the recognized transmitter(s) in the cupholder. 2. Insert the vehicle key of the transmitter into the key lock cylinder on the driver door handle and turn the key, counterclockwise, to the UNLOCK position five times within 10 seconds. The Driver Information Center (DIC) displays READY FOR REMOTE #2, #3, #4, etc. 3. Place the transmitter into the transmitter pocket. The transmitter pocket is inside the center console storage area between the driver and front passenger seats. The storage area will need to be opened and the storage tray lifted up to access the transmitter pocket 4. Press the ENGINE START/STOP button. When the transmitter is learned the DIC display will show that it is ready to program the next transmitter. 5. Remove the transmitter from the transmitter pocket and press the transmitter UNLOCK or LOCK button. To program additional transmitters, repeat Steps 3-5 Each vehicle can have up to eight transmitters matched to it. When all additional transmitters are programmed, press and hold the ENGINE START/STOP button for 12 seconds to exit programming mode. Works on: Cadillac SRX (2015-2016)