K+ Black Tough ABS-Like Resin (1kg)
Click here to download the settings K+ has undergone a formula upgrade based on K resin, making it an ideal material for producing functional parts or assemblies. K+ and K printed parts have similar physical properties—High stiffness and toughness, extremely high dimensional and detail accuracy. However, K+ has lower water absorption and better scratch resistance compared to K, which makes K+ more widely used, such as for parts operating in high humidity environments or components that require repeated disassembly and assembly. In addition, the K+ printed parts are pure black and will not appear blue purple in sunlight, with a texture and mechanical properties similar to those of injection molded parts. ▌ Reviews Youtube: resione 高強度・高靭性 レジン 比較-By のすけ【自作PC】 Youtube: Winter Soldier Vibranium Arm--By Do3D.com ▌ Attention K+ resin liquid has a special odor Excessive post-curing or low temperature will make prints brittle Do not apply too much force to the prints just after post-curing, it will take several hours for the prints to reach the mechanical properties they should have ▌ The difference between K+and K K+ resin has some special odors compared to K The K+ prints are pure black, while the K prints will show a deep blue purple color in sunlight The water absorption of K+ printed parts is lower than that of K K+ is scratch resistant, while K is not scratch resistant ▌ Descriptions Stiff and Tough, High Strength Printed parts have excellent tensile, bending, and impact strength, and their mechanical properties are comparable to those of tough thermoplastic plastics. They allow drilling, tapping, and other high stress modifications, making it very suitable for producing functional parts and fixtures that will experience long-term static loads, transient stresses, or strains. High Precision, Sharp Details The special formulation of the K+ resin makes it less prone to overexposure and enables the printed parts to accurately reproduce the extremely fine details of the 3D data such as grooves, textures, hairs, holes and protrusions. And the parts can achieve precise assembly, making it an ideal material for producing precision parts, assembly components, and mini doll accessories. Low Water Absorption Printed Parts Materials with high water absorption will significantly soften, deform, or even crack with increasing environmental humidity, while K+ printed parts have low water absorption and are less affected by humidity changes, making them suitable for high humidity environment and certain underwater operations. Scratch Resistance The surface of K+ printed parts is hard, with excellent scratch resistance performance. The surface of the parts will not be easily scratched by hard objects or powdery by friction. If you need to print parts that require repeated assembly or snap fit, this resin is a good choice. Pure black, with a texture similar to that of injection molded parts K+ resin is a pure black liquid, and printed parts will not appear blue purple in sunlight like K resin. It has a delicate texture similar to injection molded parts, the appearance is high-end and good-looking. It is an ideal material for producing appearance verification prototypes, artworks, interior decorations, and toy accessories. ▌ Print Settings Operating Temp: 20~35℃/68~95℉ Layer Height: 0.05mm Exposure Time: 3.3~5s Bottom Exposure Time: 50~70s Lifting Height:LCD Screen size less than 8.9 inches: 6mmLCD Screen size ≥8.9 inches: ≥9mm Rest Time After Retract/Off times /Light-off Delay: ≥2s "Anti-aliasing"/"Grayscale" remains OFF！ ▌ Cleaning and Post-curing Cleaning time: ≤5mins Cleaning solvent: 95% Ethanol or IPA Post-curing light source: 385-405nm UV(40W) Post-curing time: 10min ▌ Compatible 3D Printer All series of Anycubic，Elegoo，Nova3d，Peopoly，Phrozen，Epax，Creality，Zortrax, BIQU, QIDI, UNIZ, Flashforge, Voxelab, Longer, Uniformation etc. UV 395-410nm LCD resin 3D printer All series of Anycubic，Asiga, Elegoo, Solus series, Miicraft, Kudo3d, Flashforge，Makex，Shining etc. UV 385-410nm DLP resin 3D printer ▌ Material performance parameters METHOD DATA Viscosity(25℃)(mpa.s) ASTM:D4212-10 316 Liquid density(g/cm³) ASTM:D4052-22 1.105 Solid density(g/cm³) ASTM:D792-20 1.182 Shore Hardness(D) ASTM:D2240-05 85 Tensile Strength(MPa) ASTM: D638-14 41 Tensile Modulus(MPa) ASTM: D638-14 1444 Elongation at Break ASTM: D638-14 25.70% Flexural Strength(MPa) ASTM: D790-10 63.41 Flexural Modulus(MPa) ASTM: D790-10 2020 Notched IZOD(J/m) ASTM:D256-10 30.3 Water Absorption（24hr） ASTM:D570-22 0.30%