SP64 Standard Pro Resin (1kg)
A stable and reliable standard Pro resin, with printed parts featuring low shrinkage deformation, high detail precision, and a matte, premium texture. ▌ Key Features Low shrinkage deformation, Matte finish, Sharp details, Easy to use, Stable, Fast post-processing, Low water absorption ▌ Descriptions Low Shrinkage and Stable Printing This 3D printing resin possesses low shrinkage characteristics due to its sufficient rigidity and low water absorption rate, ensuring stable formation for both large-scale figures and miniatures. Printed parts are less prone to warping, softening, or cracking, thus guaranteeing stable mechanical performance and shape. Matte finish that showcases intricate details The SP64 resin produces finished products with high coverage colors and a matte finish, clearly displaying intricate details. Surface imperfections are easily visible, facilitating post-processing. Easy Cleaning This 3D printer resin can be quickly cleaned with solvents like IPA or alcohol. After drying, the surface of the printed parts is non-tacky, and delicate or thin structures are not easily damaged during cleaning or drying. Support for Ultra-Fine Supports The clever formulation of SP64 and its good strength during the printing process allow users to set Tip Upper Diameter of 0.1 mm or 0.15 mm for small-scale or lightweight models. Such supports are easier to remove and sand, speeding up post-processing. Wide Compatibility and User-Friendly Operation This resin is compatible with the parameter settings of mainstream LCD/MSLA/DLP 3D printers, allowing users to skip complicated adjustments, making it easy for beginners to get started quickly. ▌ Attention Although this material has matte properties, the matte effect also depends on many factors such as the printer and the angle at which the model is placed, so the final print may be semi-matte. If the post-curing time is too long, it can cause warping of the printed parts and make them become brittle. If you need the printed parts to maintain certain toughness, please minimize the post-curing time as much as possible. Non-hollow miniatures may even be left without post-curing. Immediately after post-curing, the printed parts is fragile. It is not recommended to apply force to the prints. It is advisable to wait for a period of time for the prints to cool naturally to release internal stresses and restore its intended mechanical properties. ▌ Print Settings - Light peach Operating Temp: 25~35℃/77~95℉ Layer Height: 0.05mm Exposure Time: 2~3s Bottom Exposure Time: 40~50s Lifting Height: LCD Screen size less than 8.9 inches: 6mm LCD Screen size ≥8.9 inches: ≥9mm Rest Time After Retract/Off times /Light-off Delay: ≥3s ▌ Print Settings - Medium gray, Blue-gray, Black Operating Temp: 25~35℃/77~95℉ Layer Height: 0.05mm Exposure Time: 2.4~3.6s Bottom Exposure Time: 50~60s Lifting Height: LCD Screen size less than 8.9 inches: 6mm LCD Screen size ≥8.9 inches: ≥9mm Rest Time After Retract/Off times /Light-off Delay: ≥3s ▌ Cleaning and Post-curing Cleaning tools: Hand washing Cleaning time: ≤5mins Cleaning liquid: 95% Ethanol or IPA Post-curing method: For example, using the Anycubic Wash Plus curing and washing machine, cure the front and back of the printed object for 0~3 minutes each. ▌ Compatible 3D Printer All series of Anycubic，Elegoo，Nova3d，Peopoly，Phrozen，Epax，Creality，Zortrax, BIQU, QIDI, UNIZ, Flashforge, Voxelab, Longer, Uniformation etc. UV 395-410nm LCD resin 3D printer All series of Anycubic，Asiga, Elegoo, Solus series, Miicraft, Kudo3d, Flashforge，Makex，Shining etc. UV 385-410nm DLP resin 3D printer ▌ Material performance parameters METHOD SP64 Viscosity(25℃)(mpa.s) ASTM:D4212-10 495 Liquid density(g/cm³) ASTM:D4052-22 1.105 Solid density(g/cm³) ASTM:D792-20 1.24 Shore Hardness(D) ASTM:D2240-05 95 Tensile Strength(MPa) ASTM: D638-14 49.91 Tensile Modulus(MPa) ASTM: D638-14 1667 Elongation at Break ASTM: D638-14 5.99% Flexural Strength(MPa) ASTM: D790-10 82.9 Flexural Modulus(MPa) ASTM: D790-10 2718 Notched IZOD(J/m) ASTM:D256-10 14.18 Water Absorption（24hr） ASTM:D570-22 0.61%