TH72 Long-lasting Non-brittle Resin (1kg)
Click here to download the instruction manual Click here to download the settings Upgrade Notice Based on the medium gray version of TH72 resin, we have introduced two new colors: matte gray and white. These new colors of TH72 are easier to clean than the medium gray version, do not have a shiny, reflective, or sticky surface, and have a matte finish. They are also more resistant to yellowing. Additionally, their other properties are the same as the medium gray version. TH72 is a long-term tough resin, so you don't have to be careful when you play with prints, and it will not be easily damaged during long distance transportation. It is an ideal material for printing hair, capes, swords, etc., as well as static figures and models with hollow interiors, it can also be used as a toughening agent for other resins. ▌ Attention The model with thin and less support was successfully printed with resins with good rigidity (such as standard resin, rigid resin, ABS resin, etc.), but it might will failed to print with TH72 resin instead. It's recommended when printing with TH72 resin after the following treatment: a) Add more supports at the island of the model; b) The higher the supports, the larger the middle diamete; c) The heavier the model, the thicker the supports. The resin prints will be fragile after post-curing. It is not recommended to apply force to the prints immediately. Just need to wait for a while until the internal stress of the prints is completely released. ▌ Reviews Gnomes Paintshop Youtube: それつくちゃんねる / SoreTsuku bilibili: up鹏up Youtube: べにやのVlog Youtube: Primogenitor Prints Youtube: 3D Print BJD Wear Resistant Joints - RESIONE TH72 & M70 Resin Review--By Helene Holz Youtube: TH72 & Siraya tech Fast--Nathan Kozuch ▌ Certification RoHS ▌ Descriptions The prints are not easily damaged TH72 prints can withstand accidental accidental drops, and it will not be easily damaged during long distance transportation. You can significantly bend or even fold prints with a wall thickness of less than 3mm. It is ideal for printing durable figurines and miniatures. Long-lasting toughness TH72 prints will not become brittle over time. After a long time of outdoor environment test in subtropical summer (dozens of days of sunshine and rainy weather) and 8-hour high temperature drying at 50-60 ℃, the prints still maintain toughness and strength, the weather resistance is good. Hollowed out prints will not crack Models that have been "hollowed out" usually develop surface cracks over time because their interiors cannot be completely cleaned and post-cured. However, TH72 rarely exhibits this issue, allowing you to save more material. Very low water absorption With a water absorption rate (48hr) of 0.6%, TH72 performs exceptionally well among 3D printer resins. This ensures that prints do not soften due to increased air humidity or crack from long-term moisture absorption. The prints can be used in short-term underwater operations and outdoor scenarios. As a toughening agent for other resins Tests have shown that adding TH72 to rigid/standard resins significantly increases their toughness when TH72 constitutes 40% of the mixed resin, while maintaining sufficient strength. ▌ Cleaning and Post-curing Cleaning tools: Manual cleaning or 2 in 1 Wash Cure Machine Cleaning time: ≤5mins Cleaning solvent: 95% Ethanol or IPA Post-curing light source: 385-405nm UV(40W) Post-curing time: 15-30mins ▌ Compatible 3D Printer All series of Anycubic，Elegoo，Nova3d，Peopoly，Phrozen，Epax，Creality，Zortrax, BIQU, QIDI, UNIZ, Flashforge, Voxelab, Longer, Uniformation etc. UV 395-410nm LCD resin 3D printer All series of Anycubic，Asiga, Solus series, Miicraft, Kudo3d, Flashforge，Makex，Shining etc. UV 385-410nm DLP resin 3D printer ▌ Material performance parameters METHOD DATA Viscosity(25℃)(mpa.s) ASTM:D4212-10 516 Liquid density(g/cm³) ASTM:D4052-22 1.112 Solid density(g/cm³) ASTM:D792-20 1.198 Shore Hardness(D) ASTM:D2240-05 75 Tensile Strength(MPa) ASTM: D638-14 26.23 Tensile Modulus(MPa) ASTM: D638-14 541 Elongation at Break ASTM: D638-14 29.35% Flexural Strength(MPa) ASTM: D790-10 16.9 Flexural Modulus(MPa) ASTM: D790-10 556 Notched IZOD(J/m) ASTM:D256-10 27 Water Absorption（24hr） ASTM:D570-22 0.69%