Tough74 Wear-resistant Tough Resin (1kg)
Tough74 resin is a wear-resistant, tough material with excellent surface quality, making it ideal for producing durable action figures. It offers good notched impact strength and elongation at break, while also maintaining impressive rigidity. The material has a smooth, wear-resistant surface. Movable dolls printed with Tough74 exhibit exquisite surface quality and playability comparable to traditionally manufactured products. The joints maintain tight engagement even with prolonged friction, and thin structures do not break unexpectedly during assembly or play. ▌ Reviews Youtube: Reviews of Making Action Figures with Tough74 -- Teccotoys Youtube: Before you Buy the Resione Tough74 | 3D printable action figures | Azrach Toys Youtube: state of 3d printable toys review with Resione Tough 74--Headhunters Customs ▌ Attention Please fully post-cure the parts at the joint engagement positions. Ensure that these parts are exposed to UV light without obstruction in the post-curing chamber to achieve the required wear resistance If the post-curing time is too long, it can cause warping of the printed parts and make them hard and brittle Immediately after post-curing, the printed parts is fragile. It is not recommended to apply force to the prints. It is advisable to wait for a period of time for the prints to cool naturally to release internal stresses and restore its intended mechanical properties ▌ Descriptions Rigid and Tough, Wear-resistant, Durable RESIONE Tough74 is a robust material with excellent toughness indicators such as notch impact strength and elongation at break, as well as rigidity indicators like bending and tensile strength. Its smooth and wear-resistant surface, combined with low shrinkage and fatigue resistance, ensures that joints made with it are less likely to powder, loosen, or break over long periods of friction. We recommend presetting a size gap of about 0.05mm at the joint engagement positions during modeling. Fine Surface, Easy to Clean Tough74's formula is specially designed to produce models with smooth surfaces without losing intricate details. Printed parts are easy to clean, and after washing, the surface is non-sticky and non-reflective, providing a texture comparable to traditionally manufactured products. Good Rigidity During Printing, Reducing Failures Tough74 combines rigidity and toughness, providing sufficient rigidity for models and supports during printing, preventing stretching, deformation, and shifting. This helps avoid the high failure rates seen with other tough materials. When printing lightweight models like miniatures and doll parts, this material allows for the addition of fine supports, reducing damage to the model, saving post-processing time, and delivering higher quality prints and production efficiency. Ideal for Drop-resistant Tabletop Game Miniatures Its durability, good detail, and high surface finish make Tough74 an ideal material for 3D printing tabletop game miniatures. When painting and handling models, you don't have to worry about them being damaged from accidental drops, greatly enhancing the gaming experience. However, we recommend using a layer height of 0.05mm instead of 0.02-0.03mm for miniatures to avoid significantly increased printing difficulty. Especially Suitable for Sturdy Action Figures The wear resistance, durability, and low shrinkage characteristics, along with excellent surface quality, make Tough74 an ideal material for manufacturing articulated figures. Joints printed with it remain tight over long periods without loosening, with just the right amount of damping, allowing for free posing of figures, significantly enhancing their playability and fun. ▌ Print Settings Gray Operating Temp: 25~35℃/77~95℉Layer Height: 0.05mmExposure Time: 2~3sBottom Exposure Time: 45~65sLifting Height:LCD Screen size less than 8.9 inches: 6mmLCD Screen size ≥8.9 inches: ≥9mmRest Time After Retract/Off times /Light-off Delay: ≥3s Black Operating Temp: 25~35℃/77~95℉Layer Height: 0.05mmExposure Time: 2.4~3.6sBottom Exposure Time: 55~75sLifting Height:LCD Screen size less than 8.9 inches: 6mmLCD Screen size ≥8.9 inches: ≥9mmRest Time After Retract/Off times /Light-off Delay: ≥3s ▌ Cleaning and Post-curing Cleaning method: move the handheld printed parts back and forth in the cleaning solution Cleaning time: ≤5mins Cleaning solvent: 95% Ethanol or IPA Post-curing light source: 385-405nm UV(40W) Post-curing time: 30mins ▌ Material performance parameters METHOD DATA Viscosity(25℃)(mpa.s) ASTM:D4212-10 556 Liquid density(g/cm³) ASTM:D4052-22 1.119 Solid density(g/cm³) ASTM:D792-20 1.198 Shore Hardness(D) ASTM:D2240-05 80 Tensile Strength(MPa) ASTM: D638-14 33 Tensile Modulus(MPa) ASTM: D638-14 1218 Elongation at Break ASTM: D638-14 20.00% Flexural Strength(MPa) ASTM: D790-10 49 Flexural Modulus(MPa) ASTM: D790-10 1523 Notched IZOD(J/m) ASTM:D256-10 17 Water Absorption（24hr） ASTM:D570-22 0.96%