Technics SA-913 Stereo Receiver 70 Watts - Mag Phono Input - Compact - Very Nice & Clean

Vintage 1981 Technics SA-913 Stereo Receiver, tested and working and as you can see is very clean.  It's a  AM/FM retro receiver that brings clarity to many of the weakest stations.   The Technics SA-913 is a solid-state high-sensitivity AM-FM Stereo REceiver. The four-gang FM front-end section utilizes a state-of-the-art device, called a "dual-gate Metal-Oxide-Semiconductor Field Effect Transistor". Engineers shorten this mouthful to MOSFET (or IGFET for "insulated gate" FET). What it means to you is that your Tuner has extra-high sensitivity, combined with exceptionally low noise and an unusual immunity to distortion caused by electrical interference at these high frequencies and minute signal levels. Maybe that's a little too "technical" for you-but it's all solid up-to-the-minute engineering technology. The AM circuitry is specifically designed for wide-band-width response. This means that you get the maximum sound fidelity of which AM broadcast technology is capable. FM Multiplex circuit is a Phase Look Loop IC (PLL-IC) which provides rock-stable stereo separation even with temperature changes. Selectable FM-IF bandwidth-narrow or wide-to let you optimize either high-frequency response or selectivity, depending on signal conditions. High Blend Multiplex filter switch lets you reduce high-frequency noise on FM stereo broadcasts, 17 x 3.5 x 8.5 inch 10 lbs Specifications Tuning range: FM, AM Power output: 35 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.04% Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 78dB (MM), 95dB (line) Output: 150mV (line) Speaker load impedance: 4Ω (minimum)