Pan DIY Keyboard PCB Kit

BUILD GUIDE HERE This includes everything you need for a working keyboard besides a plate, switches, keycaps, and cable. Screw-mount transparent stabilizers are recommended. The optional case shown is Ganymede. The brass plate in some photos was made by Laserboost. Pan requires a plate to be assembled. You can get one here or DIY. Pan supports a wide range of layouts. The PCB supports all layouts, but a specific plate must be selected. Check the guide to see how to configure a plate. You can either purchase one with your kit, or make it yourself using the open-source design files. Pan is a fully DIY keyboard, all components must be soldered on. Kit includes: Middle and bottom PCBs Atmega32A controller and components 64x Through-hole diodes 62x RGB LEDs and capacitors Acrylic cover, your choice of cutout USB-C port (center or left mount) Standoffs and screws Optionally, you may use a Proton-C, and solder the included USB port and diodes. Additional optional features include: 1-2 Encoders, RGB or standard (left mount USB will prevent 2x encoders) OLED panel Mini-B USB port Proton-C controller A more detailed BOM is available here.