Stan's NoTubes Tire Sealant

Stan's NoTubes tire sealant is the most respected and widely used tire sealant for tubeless tires on the market today. It has been proven by more than a decade of R&D in conjunction with top pros. Seals punctures in tubeless tires up to 1/4" Micro crystals seal punctures up to 1/4" on the fly.  Also works in tubular tires, and inner tubes In addition to the most common use (in tubeless tires) Stan's NoTubes sealant can also be used in tubular tires, and inner tubes. How much sealant is needed? Stan's NoTubes suggests the following starting points: road and cyclocross tires - 2oz 29'er cross-country MTB tires - 3-4oz more or less sealant can be used based on how porous the tire is  Non-hazardous, long-lasting formula The Stan's NoTubes natural latex formula is non-corrosive and non-toxic. Stays liquid for 2-7 months for long-lasting protection against punctures. How to install Stan's NoTubes tire sealant Stan's NoTubes sealant can be installed in one of two ways: 1. By injecting the sealant directly through a valve with a removable core using a sealant injector. Simply remove the valve core, thread the injector onto the valve, shake the bottle thoroughly, invert the bottle, and inject the sealant. 2. By directly installing the sealant into the tire. With one side of your tire installed, hang the wheel vertically, with the valve stem at the bottom. Shake thoroughly, invert the bottle, and pour directly into the tire. Mount the tire as normal, starting at the top and working toward the valve stem. When you're ready to install the final section of tire bead, rotate the wheel so the valve is at the top, then mount the final section of bead.  For both methods, inflate to about 30 PSI to seat the bead, then rotate, bounces, and agitate the inflated tire to distribute the sealant. Low-viscosity formula; works in temperatures as cold as  -20° F (-28° C) Choose pint or quart size