FingerTech Mini Power Switch

Has your robot been lacking a high-current power switch?  Tired of plugging and unplugging the battery during an intense competition?   This Mini Switch can be activated with the simple twist of an allen key.Installation:Two mounting holes, spaced 7.62mm (0.3in) apart, can pass-through 2mm or 2-56 screws, or can be tapped for 3mm or 4-40 screw threads.Tip: Connect the battery to the terminal closest to the screw head. The screw head is part of the circuit (constant connection to the far terminal), so this will ensure it is not live when the robot is off.Allowable soldering temperatures:350C : continuous400C : 1min450C : 12s480C : 8sOperation:To connect the two copper terminals, use a 3/32" hex wrench to tighten the screw (clockwise). * It does not take a lot of force to make a good connection - just finger-tight.(The nylon is undersized to keep the screw from backing out due to vibrations.)One full rotation counterclockwise disconnects power.Current Ratings (using 16-gauge wire):Rated