Arduino Uno Rev4 Minima

Description Arduino Uno Rev4 Minima Offers a 32-bit development board Features the standard 14 digital I/O ports Based on the 32-bit RA4M1 series microcontroller Comes with 256 KB Flash and 32 KB SRAM memory Easy power management Operating Voltage: 5 V The Arduino Uno Rev4 Minima is the first UNO series 32-bit development board, being previously based on 8-bit AVR microcontrollers. There are thousands of guides, tutorials, and books written about the UNO board, where UNO R4 Minima continues its legacy. The board features the standard 14 digital I/O ports, 6 analog channels, and dedicated pins for I2C, SPI, and UART connections. Compared to its predecessors the board has a much larger memory, 8 times more flash memory (256 kB), and 16 times more SRAM (32 kB). Entry-level Projects: If this is your first project within coding and electronics, the UNO R4 Minima is a good fit. It is easy to get started with and has a lot of online documentation (both official + 3rd party). Easy Power Management: the UNO R4 Minima has a barrel jack connector and supports input voltages from 6-24 V. This connector is widely popular and removes the need for additional circuitry required to step down the voltage. Cross Compatibility: the UNO form factor automatically makes it compatible with hundreds of existing third-party shields and other accessories. View more What's Included 1x Arduino Uno Rev4 Minima Dimensions 53.34 x 68.85 mm (L x W) Links PDF Files Arduino Uno Rev4 Minima - Datasheet Arduino Uno Rev4 Minima - Schematics Specifications R7FA4M1AB3CFM#AA0 48 MHz Arm Cortex-M4 microprocessor with a floating point unit (FPU) Operating Voltage: 5 V Real-time Clock (RTC) Memory Protection Unit (MPU) Digital Analog Converter (DAC) Memory Flash Memory: 256 KB SRAM: 32 KB Data Memory (EEPROM): 8 KB Pins 14x digital pins (GPIO), D0-D13 6x analog input pins (ADC), A0-A5 6x PWM pins: D3, D5, D6, D9, D10, D11 Peripherals Capacitive Touch Sensing Unit (CTSU) USB 2.0 Full-Speed Module (USBFS) ADC: up to 14-bit DAC: up to 12-bit Operational Amplifier (OPAMP) Power Recommended input voltage (VIN): 6 - 24 V Operating voltage: 5 V Barrel jack connected to VIN Pin Power via USB-C at 5 V Schottky diodes for overvoltage and reverse polarity protection Communication 1x UART (pin D0, D1) 1x SPI (pin D10-D13, ICSP header) 1x I2C (pin A4, A5, SDA, SCL) 1x CAN (pin D4, D5, external transceiver is required)