Digilent MCC 128 16-bit, Analog Input DAQ HAT for Raspberry Pi

Description Digilent MCC 128 16-bit, Analog Input DAQ HAT Designed for Raspberry Pi (Not Included) Offers a 16-bit, high-speed voltage measurement DAQ HAT Provides single-ended and differential input modes Onboard sample buffers allow high-speed acquisition Stack up to eight MCC HATs onto a single Raspberry Pi The Digilent MCC 128 16-bit, Analog Input DAQ HAT for Raspberry Pi is a voltage HAT (Hardware Attached on Top) board designed for use with Raspberry Pi. The MCC 128 HAT provides 8 SE/4 DIFF analog inputs for voltage measurements. Up to eight MCC HATs can be stacked onto one Raspberry Pi. A HAT is an add-on board with a 40W GPIO (general purpose input/output) connector that conforms to the Raspberry Pi HAT specification. View more What's Included 1x Digilent MCC 128 16-bit, Analog Input DAQ HAT for Raspberry Pi Dimensions Size 65 x 56.5 x 12 mm / 2.56 x 2.22 x 0.47 inch (L x W x H) Links PDF File Digilent MCC 128 16-bit, Analog Input DAQ HAT for Raspberry Pi - Datasheet Specifications A/D converter type: Successive approximation ADC resolution: 16 bits Number of channels: 8 Input voltage ranges: ±10 V, ±5 V, ±2 V, ±1 V Input impedance: >1 G Ω Input bias current: ± 200 pA, typ Input bandwidth, small-signal (-3 dB): 220 kHz Maximum working voltage: Input range relative to AGND: ±10.1 V max Crosstalk: Adjacent channels, DC to 10 kHz: -70 dB Input coupling: DC Recommended warm-up time: 1 min Supply current, 5 V supply: Typical: 85 mA | Maximum: 135 mA Operating temperature: 0 to 55 °C Storage temperature: -40 to 85 °C max Relative humidity: 0% to 90% non-condensing Software: MCC DAQ HAT Library Supported Operating Systems: Linux / Raspbian Programming API: C, C++, Python