F405 V5 2-4S 25x25 AIO Flight Controller with 8Bit 20A ESC

Based on the F405 2-4S 20A Brushless Flight Controller V4, the F405 4S 20A Toothpick Brushless Flight Controller V5 applies a new ICM42688 gyro and ESC chip that comes with BLUEJAY ESC firmware so it supports bidirectional D-shot. In addition to plug&play ports for the receiver and HD Digitial VTX the same as the V4 board, the V5 board is made with a rational layout for easy solder and preventing solder from jumping to another pad and shorting components. Features Not only is the flight controller board made with a rational layout but it is also designed with larger solder pads. It is very easy for pilots to solder external electronics. The flight controller is capable of handling 20A continuous current and reaching 25A peak current due to high-quality MOSFETs. Soldering motor wires to pad directly allows lower resistance for more current on motors. Besides, solder pads are reinforced by thick copper and edge plating process, ensuring a solid value and durable use. Reserving the UART ports layout, UART3 for RX, UART4 for HD digital VTX, UART6 for Analog VTX and UART1 for spare use, it is more convenient for pilots to solder. Come with a 25.5*25.5mm whoop mounting pattern, this board can be added to both the toothpick drone and the cinematic whoop quadcopter frame. Specifications Flight Controller CPU: STM32F405RGT6 Six-Axis: ICM42688 (SPI connection) Mounting Size: 25.5*25.5mm (M2 Anti-vibration rubber damper available) FC Firmware: betaflight_4.3.1_BETAFPVF405 OSD: Built-in Betaflight OSD (OSD chip: AT7456E) Receiver: SBUS/CRSF/DSMX Receiver BEC: 5V 3A Built-in current sensor Weight: 8.35g ESC ESC Chip: SILABS EFM8BB21F16G-C Support D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM Input voltage: 2S-4S Lipo Continuous current: 20A Peak current: 25A Firmware: G_H_20_48_v0.16.HEX (Default BLUEJAY), BLHeli_S (Optional) Includes 1 * F405 4S 20A Toothpick Brushless Flight Controller V5 BLHeli_S (ICM42688) 1 * Cable Pigtail (XT30) 1 * 6-Pin Connector for Digital VTX 1 * 4-Pin Connector for RX 4 * M2x12 Screws 8 * M2 Nuts 4 * M2 Anti-vibration Rubber Dampers Wiring Diagram LED Status Description Power LED (Red) Solid Power on FC LED (Blue) Solid Motor Armed Connecting External RX/HD Digital VTX F405 4S 20A FC V5 integrates the Plug & Play port for the external RX and HD digital VTX, and there will be a 4-pin connector for RX and a 6-pin connector for HD digital VTX in the package. Thus, we highly recommend pilots use the port to save the solder work.