Anthem STR Integrated Amplifier
Anthem STR Integrated Amplifier Powering the Future of Audio.The revolutionary STR Integrated Amplifier is based on an entirely new technological platform, for true benchmark performance in stereo amplification. More power, more control, more connection options, and the most advanced technology available in a single, easy-to-use component.Designed, engineered, and Crafted in Canada, the STR Integrated Amplifier combines the benefits of an advanced preamp with the power of a massive amplifier and processor. It includes leading-edge DAC, onboard Anthem Room Correction (ARC ), customizable bass manager for mono or stereo sub outs, MM and MC phono inputs far more than the average integrated amp.And it includes new generations of many of Anthem s award-winning, audiophile-loving, review-praised digital signal processing innovations, delivering a noticeably higher level of audio performance realism.This is the integrated amplifier with the power, features, connections and control to fuel your two-channel dreams, today and into tomorrow. FEATURES & FUNCTIONS High-resolution preamplifier section High current, high output amplifier section Amplifier uses 8 bipolar output devices per channel, a toroidal transformer power supply, and Advanced Load Monitoring for 200W at 8 ohms, 400W at 4 ohms, 550W at 2 ohms, all continuous Anthem Room Correction to optimize in-room response Bass management for two subwoofers , in mono or stereo Up-sampling of lower-resolution sources to 24-bit / 192 kHz Asynchronous USB Audio Input supports 32-bit / 384 kHz PCM, and DSD 2.8 / 5.6 MHz sources S/PDIF coaxial and optical, and balanced AES/EBU inputs MM and MC phono , balanced XLR, and single-ended analog inputs Analog Direct mode Graphic Front Panel Display for easy setup navigation Controllable via Ethernet, RS-232, or supplied IR remote Specs PHONO PREAMPLIFIERThe phono preamplifier is suitable for moving magnet and high-output moving coil cartridgesInput Impedance 100 (MC), 47 k (MM)Input Capacitance 270 pF (MM)Maximum Input (at 1 kHz for <0.1% THD 20 Hz - 20 kHz) 3.6 mV (MC), 37.7 mV (MM)Gain (default at 1 kHz, user adjustable 20 dB) 55 dB (MC), 35 dB (MM)RIAA Response 0.1 dB (20 Hz to 20 kHz)THD+N (at 1 kHz, 20 Hz - 20 kHz BW, 2 Vrms output) 0.008% (MC), 0.005% (MM)S/N Ratio (at 1 kHz, IEC-A, 2 Vrms output) 82 dB (MC), 96 dB (MM)PREAMPLIFIERFrequency Response digital-in, 192 kHz 10 Hz - 50 kHz (+0.00, -0.50 dB)digital-in, 96 kHz 10 Hz - 45 kHz (+0.00, -0.50 dB)digital-in, 44.1 kHz 10 Hz - 20 kHz (+0.00, -0.03 dB)analog-in, DSP mode 10 Hz - 40 kHz (+0.02, -0.20 dB)analog-in, direct mode 10 Hz - 80 kHz (+0.00, -0.10 dB)THD+N (at 1 kHz, 20 Hz - 20 kHz BW, 2 Vrms output) digital-in, 44.1 kHz, 0 dBFS 0.0008%analog-in, DSP mode, 1 Vrms input 0.001%analog-in, direct mode, 1 Vrms input 0.0020%SNR (at 1 kHz, IEC-A, 2 Vrms output) digital-in, 44.1 kHz, 0 dBFS 112 dBanalog-in, DSP mode, 2 Vrms input 110 dBanalog-in, direct mode, 2 Vrms input 120 dBMaximum Output (<0.1% THD) 2.2 Vrms except analog-direct 3.3 VrmsXLR Configuration Pin 1: Ground, Pin 2: Normal, Pin 3: Inverted