NAD Electronics C 275BEE Stereo Power Amplifier

NAD Electronics C 275BEE Stereo Power Amplifier Tons of Power for Every Situation When it comes to an NAD product, the utmost attention to detail is paid, which can be clearly seen in the likes of the C 275BEE. From the heavy gauge steel chassis to the advanced power supplies and copper buss bars, the C 275BEE represents all that NAD stands for. Equipped with NAD s ATOLogic circuit, which includes both a 12V-trigger system and signal-sensing power-on option, this extra level of flexibility makes it easy to integrate the C 275BEE into any control system. The C 275BEE also benefits from NAD s proprietary PowerDrive circuit topology, which allows the C 275BEE to deliver maximum performance under various circumstances, to even the most powerful of speakers. Delivering a well-rounded, mesmerizing performance, the C 275BEE will let you hear your music the way it was meant to be heard. The C 275BEE boasts many upgrades and refinements taken directly from the highly acclaimed NAD Masters Series M3 Amplifier. These include application of Bjorn Erik Edvardsen s innovative and patented Distortion Canceling Circuit in the output stage and BEE Clamp in the power supply. A carefully engineered PCB layout has reduced distortion and noise to unprecedented levels. Taken together, these improvements mark a sharp upturn in performance that simply must be heard, to be fully appreciated! Features: 2 x 150W Continuous Power into 4 ohms and 8 ohms 250W, 410W, 600W IHF Dynamic power into 8, 4 and 2 ohms, respectively PowerDrive circuit Holmgren Toroidal Power transformer All discrete circuitry Class A Voltage Stages Distortion Canceling Circuit BEE Anti-saturation Clamp Short signal path from input to output All sockets Gold plated Soft Clipping ATOLogic 12 volt trigger/ signal sensing input Detachable IEC Power Cable <1W Standby Power Consumption Free of lead and other environmentally dangerous substances Specs Features 2 x 150W Continuous Power into 4 ohms and 8 ohms 250W, 410W, 600W IHF Dynamic power into 8, 4 and 2 ohms, respectively PowerDrive circuit Holmgren Toroidal Power transformer All discrete circuitry Class A Voltage Stages Distortion Canceling Circuit BEE Anti-saturation Clamp Short signal path from input to output All sockets Gold plated Soft Clipping ATOLogic 12 volt trigger/ signal sensing input Detachable IEC Power Cable <1W Standby Power Consumption Free of lead and other environmentally dangerous substances Fixed IN, Speaker OUT Continuous output power into 8 and 4 (both channels driven) 150W (ref. rated THD, 20Hz 20kHz) Continuous output power into 8 (Mono, Bridge mode) 330W (ref. 20Hz 20kHz, (Mono, Bridge mode) <0.02% THD) Rated THD (250mW to rated power, CCIF IMD, DIM 100) 0.008% (ref. 20Hz 20kHz) Clipping power (4 and 8 ) 170W (ref. 1kHz 1% THD) IHF dynamic power 8 250W 4 410W 2 600W IHF dynamic power (Bridge mode) 8 800W 4 1200W Peak output current 50A (ref. 1 , 1ms) Signal/Noise ratio 102dB (A-weighted, ref. 1W) 123dB (A-weighted, ref. 150W) Damping factor 180 (ref. 8 , 50Hz and 1kHz) Frequency response 0.1dB (ref. 20Hz 20kHz) 3Hz 100kHz (ref. -3dB) Input impedance (Fixed IN) 10k + 200pF Input impedance (Variable IN) 100k + 100pF Input Sensitivity 1.2V (ref. rated power) Voltage gain 29dB Minimum input level for AUTO TRIGGER 10mV at 1kHz Time to power OFF at no signal in AUTO mode 10 minutes Power Consumption Normal operation 312W (ref. 230V AC 50Hz; 120V AC 60Hz) Standby power 1W Idle power 100W Dimension and Weight Dimensions (W x H x D) Net 435 x 133 x 352mm 17 1/8 x 5 1/4 x 13 3/4 Gross 435 x 150 x 396mm 17 1/8 x 6 x 15 3/8 Net weight 32.2 lbs (14.6 kg) Shipping weight 37.3 lbs (16.9 kg)