3018 MDF Spoilboard for 3018-PRO, 3018-PROVer

Material: MDF (Medium-Density Fibreboard). MDF is very dense translating into more weight with enhanced strength and durability.Size: 30cm x 18cm x1.2cm.  (, 11.8'' x 7'' x 0.5''); M6 Holes (6mm)Compatibility: Perfectly compatible with Genmitsu 3018 series CNC router kit.Easy to Use: Easy install spoil board with pre-installed threaded holes (6mm) for fixture clamps. Can be used with most bench clamping systems.Application: Often used when cutting or carving wooden materials. The MDF spoil board is used as a base to cut on so that your CNC table is not damaged by the cutting tool. It allows for stability in regard to your cutting material, resulting in more accurate cuts.PrecautionsMake sure the MDF spoil board is secured well to the machine bedMake sure the CNC material is clamped tight to the MDF spoil board /machine bed, or you will get vibration, chatter, poor cut finish, and can possibly break your cutting bit.You can not use any lubricant when you use an MDF spoil board. It will swell and expand if it gets wet. So using spray or mist coolant or oils is not recommended. What's included 1 x Genmitsu MDF Spoilboard ➡ Installation Guide