Grey, Flexible TPU Filament 1.75mm 0.8kg/1.76lb

OVERVIEW SainSmart TPU filament is featured by its high strength and flexibility, like a hybrid of plastic and rubber.95A TPU has high abrasion resistance and low compression compared to rubber parts, especially at higher infill. Compared with most common filaments like PLA and ABS, TPU must run much slower.    SPECIFICATION Material: Rep-Flex TPU - Vacuumed Sealed with desiccant - Shore Hardness: 95A - Weight: 1 KG (approximately 2.20 lb) Spool Weight Total, Net Weight 0.8 KG - Diameter: 1.75mm (+/- 0.05mm) - Recommended extruder temperature:195 - 230°C - Recommended platform temperature: 40 - 60°C   PRINTING TIPS Recommended for printers with direct drive extruder, 0.4~0.8mm Nozzles.With bowden extruder you might pay more attention to these tips: - Print slow 15-30 mm/s Printing speed - First layer settings. (Height 100% Width 150% speed 50% e.g.) - Retraction disabled. This would reduce messy, stringing or oozing printing result. - Increase Multiplier(Optional). set to 1.1 woul