[Discontinued] NXP ARM Cortex-M3 + 3.2" TFT LCD LPC1768 Development Board 64KB SRAM

LandTiger Development Board with NXP LPC1768 ARM is based on the second-generation ARM Cortex-M3 microcontroller core. It is designed for embedded system applications requiring a high-performance, low-power 32-bit microprocessor for instrumentation, industrial communications, motor control, lighting control, and alarm systems. The LandTiger development board features an onboard USB emulator, supports USB 2.0 Device, dual CAN interfaces, and RS-485 interface functions. It provides a wealth of routine and detailed information to help users quickly develop projects. Specifications Cortex-M3 with 512KB on-chip Flash, supporting ISP and IAP 64KB SRAM Processing rate: 100MHz, with eight areas of memory protection unit (MPU) Built-in nested vector interrupt controller AHB multi-layer matrix with 8-channel DMA controller (GPDMA) Supports SSP, UART, AD/DA, timer, GPIO, etc., for memory-to-memory transfers Standard JTAG test/debug interface and debug serial line Simulation trace module supports real-time tracking 4 low-power modes: sleep, deep sleep, power-down, deep power-down Single 3.3V power supply (2.4V - 3.6V) Operating temperature: -40°C to 85°C Non-maskable interrupt (NMI) input On-chip integrated power-on reset circuit Built-in SysTick timer for operating system migration Onboard Resources 2-Way RS232 serial interface (supports ISP download via straight-through serial cable) 2 CAN bus communication interfaces (CAN Transceiver: SN65VHD230) RS485 communication interface (485 Transceiver: SP3485) RJ45-10/100M Ethernet network interface (Ethernet PHY: DP83848) DA output interface (for onboard speaker and output driver) AD input interface (adjustable potentiometer input) Color LCD display interface (supports 2.8-inch or 3.2-inch TFT 320x240) USB 2.0 Interface, supporting both host and device SD/MMC card (SPI) interface (compatible with FAT12, FAT16, FAT32) IIC Interface (24LC02) SPI serial FLASH interfaces (AT45DB161D) 2 user keys, 2 function keys, INT0 Reset button, and 8 LED lights Joystick with 5 keys Serial ISP download function (no need to set jumpers), standard JTAG download, and simulation debugging interface Integrated USB emulator for simulation and debugging, supporting KEIL, IAR, and other mainstream development environments Optional external 5V power supply or USB input Leads for all IO, facilitating user-friendly external circuit development What's in the Package 1x Land Tiger V2.0 Development Board 1x 3.2-inch Color Touch Module 1x USB Cable 1x Serial Download Cable 1x Ethernet Cable 1x 5V AC Adapter 1x CD ROM