Battery Operated Foam Unit with Stainless Steel Ball Valve - 10 Gallon

Features: Draws from pre-mixed solution Battery operated Up to 45 minutes of continuous use from one charge Stainless ball valve with foam fan tip Hinged back plate provides tool-free access to components Natural color tank for easy visibility of product levels Hinged lid Color coding options: Lid – 5 colors (BK, BL, GN, YL, RD) Discharge hose – 4 colors (BL, GN, YL, RD) Integrated hose wraps Front-facing drain Requirements: LIQUID TEMPERATURE RANGE 40-100˚F (4.4-37˚C) ELECTRICAL REQUIREMENTS 120 VAC at 60 Hz, 1 amp (GFCI protected outlet) for battery charger only OPERATING VOLTAGE 12 VDC CHEMICAL COMPATIBILITY Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department. Specifications:    POWER TYPE Battery BATTERY CHARGE TIME (FROM FULL DEPLETION) 8 hours BATTERY RUN TIME (FROM FULL CHARGE) 45 minutes of continuous use CHEMICAL PICKUP TYPE Draws from pre-mixed solution NUMBER OF PRODUCTS UNIT CAN DRAW FROM (AND WHETHER IT DRAWS SIMULTANEOUSLY OR ONE AT A TIME) One product SUCTION LINE LENGTH/DIAMETER 3/8 in. (9.5 mm) inside diameter CAPACITY 12.5 gallons (47.32 liters) DISCHARGE HOSE DIAMETER/LENGTH 12 ft. (3.66 m) hose, with 3/8 in. (9.5 mm) inside diameter DISCHARGE WAND/TIP TYPE Polypropylene trigger handle with 50˚ fan tip OUTPUT DISTANCE 5-6 ft. (1.52-1.83 m) OUTPUT VOLUME 4-5 gal/min (15-18.93 l/min) of foam FLOW RATE* Up to 1 gal/min (3.8 l/min) PUMP SEALS Santoprene, Viton, or Kalrez WHEEL TYPE Two 10 inch non-marking wheels