Universal Knee Mill (Bridgeport, TRAK, protoTRAK, Jet) Fixture Tooling Plate

Fixture & tooling plate for various 'Bridgeport-style' knee mills (e.g. protoTRAK, Sharp, Grizzly, Jet). Compatible with any machine having a t-slot center distance of 63-65mm (2.48-2.56in) and 3+ t-slots. Note: fixture plate is centered on table. Please ensure any overhang is acceptable if your table is not wider than 12".  Measurements: 34" x 12" x 0.95". For a larger plate, see our 51" x 12" fixture plate set. Common machines include (but not limited to): Bridgeport 9x42 TRAK K3 TRAK K4 TRAK DPM RX2 TRAK DPM SX2 TRAK DPM RX3 Jet JTM-1050 Please verify fitment for your specific machine. Plate mounts to table with 8 low profile SHCS. Mounting screws and t-nuts are available as a separate option. (default hardware kit for this plate is a 5/8" (16mm) t-slot kit. View other sizes here if your table does not match). Plate has 463 fixture holes that are spaced 1.25" on-center. Each fixture hole is tapped 1/2-13 UNC and bored for 0.500" pin. Available in 4140 steel, anodized 7075 alum