Ecotex® SR Liquid Tape - Solvent Resistant Block Out

For Use With: Solvent-Based Inks Plastisol Inks UV Inks Silicon Inks Key Benefits: Fast Drying  Non-Hazardous Fills Open Areas Good for long print runs Simple & Easy To Use Ecotex® SR Liquid Tape - Solvent Resistant Block Out by Screen Print Direct® is the ultimate screen block out. This fast-drying formula is medium viscosity. It's designed to fill open areas of the screen not covered by the emulsion. This block out is created to handle squeegee abrasion and long print runs.  Want to learn more about our liquid tape? Go ahead and read our blog on - Liquid Tape  Shelf Life:+12 months For best results follow the steps below. 1. When the screen is dry and free of contaminants, put the block out on the print side of the screen and spread it over the open areas until it is completely filled. 2. Touch up the defects. This includes blobs of product which tend to dry outside and pop off or smear during printing. When very fine meshes are used you can reduce the viscosity by adding a little bit of water. 3. Remove with water. Click Here for Safety Data Sheet