Keyblade Dice Box - DIGITAL DOWNLOAD ONLY

"Although my heart may be weak, it’s not alone. It’s grown with each new experience. And it’s found a home with all the friends I’ve made... I don’t need a weapon. My friends are my power!” – Sora This Keyblade-inspired dice box will insight you to wield the Power of Light and defend against the forces of Darkness. Whether fighting hordes of Heartless, evading packs of Nobodies, or guarding against the machinations of the mysterious Organization XIII, protect the hearts of the ones you care for and become a Keyblade Master! Just remember, the closer you get to the light, the greater your shadow becomes. This is a digital download only for 3D printable files. No physical product is sold with this listing. Download link will be sent on purchase. For private use only, see below for conditions. STL Files Included: Hilt (two parts), dice box, dice tray, grip, teeth and sheath. Overall Dimensions:  Height (Bottom of hilt to top of blade): 11.02” Overall Dimension: 4.92" x 2.56" Inner Chamber: 6.2" x 1.3" x 0.4" Required hardware:(1) M3x8mm socket head hex screw(4) M3x18mm socket head hex screw(2) M3x22mm socket head hex screw Optional hardware(6) round 8x2mm magnetsKeyring hardware Sheath:Lower portion of sheath has slots for round 8x2mm magnets (optional)10% infill Gyroid0.2mm layer height (I have had success with 0.28mm with my Prusa Mk3s)Brim suggested, 5mm width, inner and outer.0.40mm widthsNo supports necessaryAdvised to print uptight, with the flat end on the build plate Hilt:10% infill Gyroid0.2mm layer height (I have had success with 0.28mm with my Prusa Mk3s)Brim suggested, 5mm width, outer only0.45mm widthsNo supports necessaryAdvised to print each piece flat on the build plate. Dice Tray:Lower portion of tray has a slot for a round 8x2mm magnet (optional)Single color10% infill Gyroid0.2mm layer height (I have had success with 0.24mm with my Prusa Mk3s)Brim suggested, 5mm width, outer only0.40mm widthsSupports advised for underside (bed plate only)Advised to print laying flat on bed Dice Box:Portion of tray has a slot for a round 8x2mm magnet to hold the dice tray (optional)Single colorSlots for (2) round 8x2mm magnets to hold the sheath (optional)10% infill Gyroid0.2mm layer height (I have had success with 0.24mm with my Prusa Mk3s)Brim suggested, 5mm width, outer only0.42mm widthsNo supports necessaryAdvised to print upright. Knurled grip:Single color10% infill Gyroid0.2mm layer height (I have had success with 0.24mm with my Prusa Mk3s)Brim suggested, 5mm width, outer only0.42mm widthsNo supports necessaryAdvised to print upright. For private, non-commercial use only.  You are authorized to: Print and use the 3D prints of the 3D model for private use, in unlimited quantity; Share the images of your 3D prints of the 3D model on communication media such as social networks or websites. What is not allowed: No commercial use or public sharing of the 3D model; No modification or adaptation of the 3D model for public sharing or sale; No distribution, sale, donation or exchange of the digital files of the 3D model. No distribution, sale, donation or exchange of physical products made using these files or deviations thereof.