Jl Audio Mvi Marine Amplifier 5 Channel Full-range 1000 Watts 12v Integrated Dsp
JL Audio MVi Marine Amplifier 5 Channel Full-Range 1000 Watts 12v Integrated DSP98651Model: MV1000/5i5-Channel Class D Marine System Amplifier with Integrated DSP, 100 W x 4 @ 2 ohms + 600 W x 1 @ 2 ohms - 14.4VEngineered to deliver reference-grade audio performance in marine environments, every MVi amplifier unites our cutting-edge NexD2™ switching amplifier technology with an integrated, full-featured digital signal processor.Equipped with our second-generation NexD2™ technology, the MV1000/5i is capable of powering a complete marine audio system. It can drive four main speakers with 75 W x 4 @ 4 ohms, while also powering a subwoofer with up to 600W @ 2 ohms. Bridging the main channels transforms it into a very powerful, 3-channel system amplifier with up to 200W x 2 @ 4 ohms on the main channels and 600W @ 2 ohms on the subwoofer channel.The NexD2™ full-range technology in the main channels of this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFET™ outputs for outstanding fidelity, very low noise and exceptional efficiency. The subwoofer channel features an optimized low-frequency variant of the NexD2™ technology. The amplifier chassis is a ultra-compact, cast alloy design with marine-grade powder coat finish and corrosion-resistant hardware.Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN® Software application installed.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications Rated Continuous (RMS) Power @ 14.4 V Main Channels @ 4 ohms 75 W RMS x 4 Main Channels @ 2 ohms 100 W RMS x 4 Main Channels - Bridged @ 4 ohms 200 W RMS x 2 Subwoofer Channel @ 4 ohms 400 W RMS x 1 Subwoofer Channel @ 3 ohms 500 W RMS x 1 Subwoofer Channel @ 2 ohms 600 W RMS x 1 Subwoofer Channel @ 1.5 ohms N/A Rated Continuous (RMS) Power @ 12.5 V Main Channels @ 4 ohms 60 W RMS x 4 Main Channels @ 2 ohms 90 W RMS x 4 Main Channels - Bridged @ 4 ohms 180 W RMS x 2 Subwoofer Channel @ 4 ohms 360 W RMS x 1 Subwoofer Channel @ 3 ohms 480 W RMS x 1 Subwoofer Channel @ 2 ohms 600 W RMS x 1 Subwoofer Channel @ 1.5 ohms N/A General Specifications Frequency Response (Main Channels) 12 Hz - 24 kHz (+0, -1dB) S/N Ratio, referred to highest rated power (Analog Inputs - Main Channels) 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to highest rated power (Analog Inputs - Subwoofer Channel) 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W (Analog Inputs - Main Channels) 80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W (Analog Inputs - Subwoofer Channel) 72 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor@ 2 ohms >50 / 50 Hz Damping Factor @ 4 ohms >150 / 50 Hz THD+N @ Rated Power (Main Channels) <1% @ 2 ohms per Ch. THD+N @ Rated Power (Subwoofer Channels) <1% @ 2 ohms per Ch. Input Voltage Range @ RCA Inputs 250 mV - 16 V RMS Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 80 A (AFS, AGU or MaxiFuse™) Physical Specifications Height 2.05 in / 52 mm Width 13.96 in / 355 mm Depth 6.93 in / 176 mm Net Weight 5.6 lb / 2.54 kg What's in the Box: MV1000/5i Amplifier Power Connector (for 4 AWG wire) Speaker Output Harnesses (2) Subwoofer Output Harness 6 ft A/B USB Cable