Breakout Card Screw Mount Type1 26-18 AWG for Raspberry Pi

FEATURES Breakout Card Screw Mount Type1, 26-18 AWG for Raspberry Pi Routes all 40 I/O and power pins to screw terminal blocks Permits easy and secure field installation 2.54mm Pitch PCB screw Terminal Block Connectors Rated voltage: 300V Rated current: 10A Wire range: 24 - 18 AWG Breakout Card Screw Mount for Raspberry Pi DESCRIPTION Breakout Card Screw Mount for Raspberry Pi The Breakout Card Screw Mount can be plugged into Raspberry Pi or into any stackable expansion card. It brings all 40 GPIO pins to screw-mount terminal blocks for conveniently wiring your project. The terminal blocks accept 26 to 18 AWG wires and are rated 6A/150V.  LAYOUT The Breakout Card Screw Mount measures only 65mm x 25mm (2.55" x 1") OTHER BREAKOUT CARDS In adition to the Breakout Card Screw Mount Type1, we have two other breakout cards for Raspberry Pi, to satisfy all your prototyping needs. All cards plug into the Raspberry Pi 40 pin GPIO connector and bring the IO's to different terminal blocks. Breakout Card Type 2 This card uses spring loaded terminal blocks, which permit rapid connection to I/O pins without any tools. The card has a prototype area  of 7 x 19 holes at 0.1" spacing which can be used to test your own hardware. The terminal blocks accept 22-18 AWG wires and are rated 5A-300V. Breakout Card Kit Pluggable-Prototype-Breadboard SM/TH for Raspberry Pi The Pluggable Breakout Kit consists of a main card with pluggable connectors and two add-on cards which can piggy-back on top of the main card.  The main card routes all Raspberry Pi  GPIO pins to heavy-duty pluggable terminal blocks. The 2x20 pin header can be plugged into Raspberry Pi or into any stackable expansion card.