Self Test Cable for Home Automation HAT for Raspberry Pi
sequentmicrosystems.com
Electronics / Components

Self Test Cable for Home Automation HAT for Raspberry Pi

$5.00
{{option.name}}: {{selected_options[option.position]}}
{{value_obj.value}}
Store Logo

Sequent Microsystems

View Store

FEATURES Self Test Cable for Home Automation HAT for Raspberry Pi Three-connector cable for self-testing the Home Automation card Self test groups of 2 inputs and outputs Command line software for each test Home Automation Self Test DESCRIPTION Raspberry Pi HOME AUTOMATION HAT Versions 3.0 and up of the Home Automation HAT has been redesigned to use only pluggable connectors. Inputs and outputs are placed on the three sides of the card in groups of four. Each group has also a Ground or Common pin. CARD LAYOUT I/O PINOUT HANDY CARD The Home Automation is accompanied by a Credit Card size, plastic laminated card which shows the I/O pinouts. Keep it handy. The back of the card shows the Raspberry Pi GPIO Connector pinout. SELF TEST Groups of three inputs and outputs can be self-tested with the help of this loopback cable.  1. TEST the GPIO and OPTO-INPUTS 1-4 Insert the cable on the left side of the card, as shown in the following picture, and run the self-test command NOTE: This t

Show More Show Less