Baby Whale Wall Light | 3D Printer Model Files

>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. << File Type: STL and 3MF 3D PRINT MODEL DESCRIPTION   Baby Whale Wall Night Light   Your Wall Light requires some assembly.   What you’ll need:  Printed light LED Module Battery Holder 12V  On-Off Switch  Solder  Soldering Iron  Electric Wire  This STL file is recommended for FDM Printers! Approximately Height :  12,3 cm  3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE) Line Width/ Nozzle: 0.4 mm First Layer Line Width: 0.48 mm / 120% Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)  Recommended Initial Layer Height:  0.20 mm Recommended Layer Height:  0.20 mm Recommended Perimeters/ Walls: 3. Recommended Infill (%): 10% (Gyroid) Needs Support: We have printed ours without supports (note that if you choose to print this way, the inside of your print will have poor finishing. You can always use supports to make your print better)