ClownFish Articulated | 3D Printer Model Files

>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. << File Type: STL and 3MF 3D MODEL DESCRIPTION  ClownFish Articulated | 3D Printer Model Files This clownfish must be drowning in fishy jokes. He should be the one writing this instead. All our fish articulated fish are print-in-place, and designed especially for better and easier assembly. For a mesmerizing movement effect, remember to only glue both sides on the pin connection   This STL file is recommended for FDM Printers! Approximately length:  Fish 8cm x 4.5cm x 4cm                                                         Stand 5cm x 8cm x 1.2cm  3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE) Line Width/ Nozzle: 0.4 mm First Layer Line Width: 0.48 mm / 120% Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers) / 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab) Recommended Initial Layer Height:  0.20 mm Recommended Layer Height:  0.12 mm Recommended Perimeters/ Walls: 3. Recommended Infill (%): 10% (Gyroid) Needs Support: No. Build Plate Adhesion: Skirt.   The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.