Grinch Christmas Tree | HueForge Filament Painting | 3D Printer Model File

>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. << File Type: STL 3D MODEL DESCRIPTION  Grinch Christmas Tree | HueForge Filament Painting | 3D Printer Model File   This STL file is recommended for FDM Printers!     Nozzle: 0.4 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Can be used in the following combinations: Half Christmas tree with Grinch filament painting Grinch filament painting only, as wall decoration Join 2 half's of the Christmas tree model to make a full Christmas tree As usual, print the Filament Painting part with 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Use the same model with the following colors: Filaments Used:     PLA Overture Black    PLA PolyTerra Charcoal Black    PLA Ziro Translucent Green    PLA Ziro Fluo Green    PLA+ eSun Green    PLA Overture WhiteSwap Instructions:     Start with Black    At layer #7 (0.64mm) swap to Charcoal Black    At layer #10 (0.88mm) swap to Translucent Green    At layer #21 (1.76mm) swap to Fluo Green    At layer #26 (2.16mm) swap to eSun Green    At layer #28 (2.32mm) swap to White for the rest.   3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE) Line Width/ Nozzle: 0.4 mm Recommended Layer Height:  0.08 mm Recommended Base Layer Height:  0.16 mm Recommended Infill (%): 100% Infill The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.