Octopus Tentacle Table Light Lamp | 3D Printer Model Files

  >>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. << File Type: STL 3D MODEL DESCRIPTION  The bottom of the ocean really needed a bit of light. But your wall or desk will do.    This STL file is recommended for FDM Printers! Approximately Height: Desk Lamp: 22,7 cm                                     Wall Lamp: 27 cm    3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)   Line Width/ Nozzle: 0.4 mm First Layer Line Width: 0.48 mm / 120% Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab) Recommended Initial Layer Height:  0.16 mm Recommended Layer Height:  0.16 mm Recommended Perimeters/ Walls: 3. Recommended Infill (%): 10% (Gyroid) Needs Support: No. Build Plate Adhesion: Brim.   The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.