SHNITPWR 5V Power Supply 5 Volt 10A 50W AC 100V ~ 240V to DC Power Adapter Converter Transformer 5.5x2.5mm Plug for WS2812B WS2811 LED Pixel Strip Light Controller Raspberry Pi Webcam Router USB-HUB

Input: AC 100 - 240V, 50 / 60Hz ; Output: DC 5V, Max 10A/10000mA, 50W ; It means that it can supply with all amperage less than 10A. ---such as 500mA, 800mA, 1A, 2.5A, 4A, 6A, 8A,10A, all is available. For example, if your device draws 5A then 5A will be supplied. If draws more than 10A, only 10A will be supplied and power supply will be damaged soon. NEVER OVERLOAD! Please pay attention to the size and polarity of the power plug.The polarity of this adapter is Central Positive(+) and Outer Negative(-).And it can Only be used for devices with sockets of 5.5 x 2.1mm! If you are not sure whether the adapter matches your device, feel free to contact us by email. Certified by FCC CE ROHS. We focus on producing high quality power adapters. No noise, low temperature operation, no spontaneous combustion, no explosion, no fire hazard, stable output. Automatic overload cut-off, over voltage cut-off, automatic thermal cut-off, short circuit protection. Compatible: WS2812B WS2811 WS2801 APA102 SK6812 WS2813 5V LED Strip Pixel light/ USB-HUB / Graco Swing / Mobile phone/ Home Phone System / VoIP Phone Router / Serato DJ Controller / Nextbook / Webcam Router / Toy / Recorder / Bluetooth Speaker / Scanner / DVR / Hard Disk Box and more 5v devices.This product is an AC to DC adapter, NOT charger!!!It can’t be used to charge electronic devices with batteries, such as laptops. Otherwise, it may damage your device. If you don't like our product or don't want it, please feel free to contact us. We will happily accept the return and give you refund, we have 30 days money back guarantee, 18 months exchange. Note: Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing. Parameter   Input: AC 100V~240V 50/60Hz Output Voltage: DC 5V ( constant voltage ) Output Current & Wattage: Max 10A 50W Output DC connector:5.5mm x 2.5mm (inside"+", outside"-") Safety Compliance: FCC / CE/ RoHS Ambient Humidity: 0~95% Non-Condensation Weight: 0.86 lb / 390g   Package included   1x 5V 10A power supply adapter 1x AC power cord   Is this DC 5V 10A power supply (PS) compatible with your device? 1. Check Voltage 1. Please find the spec label of your device and check the working voltage. It should be 5V DC, not be AC 5V or lower/higher than 5V DC. Otherwise, your device will not work or be damaged. 2. Check Current 2. Check the max current your device will draw. It should be equal to or less than 10A,such as 3A,5A,6A,8A,10A. Otherwise, your device won’t work well and the power supply will be damaged very soon. 3. Check Power Port 3. Check the power input port of your device. Its outer diameter should be 5.5mm; inner core diameter should be 2.5mm or 2.1mm. Inner core polarity should be"+", exterior polarity should be" - ". 4. Check Original PS 4. If you have a power supply for reference, their output voltage, plug size, polarity should be the same .If our PS’s current is equal to or higher than original one’s, then our PS will work with your device.