Automatic Motion Sensor Sink Faucet

Experience the ultimate convenience, hygiene, and water-saving benefits with our Automatic Motion Sensor Sink Faucet. Made with premium H59 brass and multi-layer nickel plating, it's not only durable and rust-resistant, but also sleek and drip-free. Easily adjust the water temperature with the included brass mixer valve, and follow the simple instructions for a hassle-free installation. Say goodbye to touching dirty handles and hello to a touchless washing experience! Automatic Faucet Parameters Power Supply:DC 6V,4AA alkaline Battery(not included),can last for 2 years for family use Sensoring Distance(factory setting):15cm Deck Hole Diameter:20-30mm Deck Thickness:35-45mm Deck Plate Length:6.3inch Flow Rate:8L/Min Cartridge Lifecycle:500,000 Times Water Pressure:0.05-0.7Mpa Switching Time:less than 0.7s Low Battery Indicator:Red Led Flash   Package Content Gangang faucet is packed with thick foam and color box. You will receive it in good condition with all faucets accessories included: 1x faucet body with deck plate (cover deck holes) 1x control box 1x water mixer valve,brass with build-in check valve 2x 1/2-9/16 water supply pipe, with red and blue mark(red one for hot water, blue one for cold water) 1x 1/2-1/2 water pipe (for mixing water) 4x mounting screws (fix control box on the wall) 1x instruction paper How to install Automatic Faucet Before Installation, you may need these tools: electrodrill,screwdriver,hammer,spanner,pencil. Install the faucet according to the following steps: Step 1: Mounting the faucet on the deck and fasten the nuts on under the deck. Step 2: Put 4 AA alkaline battery in the battery case (batteries are not included in the package). Step 3: Fixing the control box on the wall. Step 4: Connect water mixing vale to the control box (mixer valve outlet to control box inlet). Step 5: Connect the water hoses (cold water hose marked blue, hot water hose marked red, mixing water hose without color). Step 6: Connect the sensor signal wire