1PCS Upgraded Version 3S-6S 110A Dual-way Brushed ESC 12-24V Electric Speed Controller for RC Car DIY Robotic Mower Motor
shuaichihobby.com
Electronics / Circuit Boards & Components

1PCS Upgraded Version 3S-6S 110A Dual-way Brushed ESC 12-24V Electric Speed Controller for RC Car DIY Robotic Mower Motor

$21.49
{{option.name}}: {{selected_options[option.position]}}
{{value_obj.value}}
Store Logo

shuaichihobby

View Store

Remark: this is upgraded version Specification:- Item name: bidirectional brushed ESC- Working voltage: 12V-24V ( 3S-6S )- Size ( length x width x height ): 68.8x41.7x37mm- Used for rc bait boat, for diy model car, for children kids rc car, rc robotic mower motor- Peak Current ( forward/backward): 110A- Rated Power: 1000W- Remote control signal PWM: 800us-2200us- Neutral point: 1500us- Build in 28PCS MOS FET- With cooling fan- "H" bridge structure - Motor Limit:Drive ability at the same time at 12V: 3PCS 540, 3PCS 550, 2PCS 775, 2PCS 795, 1PCS 895 or 1PCS 997 MotorsDrive ability at the same time at 24V: 2PCS 775, 2PCS 795, 1PCS 895 or 1PCS 997 Motors Description:- Automatically to find the neutral point, No throttle rang calibration required.- Build in 5V/3A UBEC, it can drive 2PCS 25kg servos.- The ESC is not waterproofed- Do not equip with power supply plug Application:- Widely use for RC boat, RC tug boat, RC fishing bait boat, RC cruise, RC marine, RC car, tank etc.- Suitable for 540, 550, 775, 795, 895, 997 brush motor. Three Working modes (Be set by switch):Mode 0: Forward/ Backward Model.Mode 1: Forward/Brake/Backward (neutral point brake)Mode 2: Forward/Brake/Backward (Throttle stick move back brake) - Mode 0: no brake- Mode 1: The throttle stick move back to the neutral postion, the motor braked to a stop. When the motor is forward rotation, pull back the throttle, motor reverses immediately.- Mode 2: The throttle stick move back across the neutral postion, the motor braked to a stop,At this time, if you want to reverse the motor, you must move the throttle stick to the neutral ponit first. LED indicator:LED on-- Working normallyLED flash-- The throttle stick is not at the neutral pointLED flash fast-- Signal lost How to use:- Connect with receiver,motor,battery correctly.- Turn on the power of ECS, If the transmitter is off, LED will flash fast.- Push the throttle stick to the neutral point, turn on the transmitter, and adjust the throttle trim until the LED on, that means the neutral position has been confirmed. Note:- UBEC is a switching-Mode regulators, please don't use two ESC in parallel to power the receiver, otherwise they will be burned.- Size is manual measurement, so there are exist errors Package included:1pcs x ESC

Show More Show Less