4PCS Max Current 1A DPDT Relay PWM Switch Support 5V Receiver Electronic On-off Module fo Remote Control Drone Model Light Controller

Features:- 5V-10V voltage receiver is supported, otherwise the module may be damaged. If the receiver and the servo are using a high voltage system, the module should be added with a step-down module.- 1 channel servo signal input, control 1 relay switches- Parallel maximum 1A current- One way LED indicates working status- With boot protection, easy to operate- Input channels do not need to be calibrated, compatible with various brands of remote control devices- Adopt transparent heat-shrinkable rubber, stylish appearance, at a glance- Small size and light weight Application range:- Remote control model rocket launch- Remote control model smoke control- weapon system control like real machine- Model aircraft's smoke control- Control of various remote switch systems-Switch the signals of two cameras- Control the opening and closing of various electrical power sources, such as navigation lights, searchlights, strobe lights, buzzers, etc.- Control the camera shutter or switch the camera's recording and camera mode. Functional Description:- The remote switch remotely controls the electrical equipment on the aircraft model through a switch channel on the remote control, and the 1-way LED dynamically demonstrates the current switch state in real time, so it can be quickly started without an operation manual.- This device does not require calibration and can be accurately compatible with remote control devices of various brands. Typical application:1. Connect- Plug the signal input cable into an idle receiver channel that corresponds to a switch on the remote.- The power indicator will be illuminated when connected to the receiver.- The work indicator lights up when the switch channel is open and vice versa.2. Working mode- The red LED light indicates the power indicator.- The blue LED indicates the relay's operating status.3. Trigger- Turn the switch on the remote control (OFF->ON), the green LED lights up and the relay starts to work. Package included:1pcs x relay switch or 4pcs x relay switch