18 dBi 890-960MHz Direc. Reflector Parabolic Commercial Grade Antenna

18 dBi Gain commercial quality parabolic directional antenna with reflector grid covering 890 to 960 MHz. This is high gain half-parabolic antenna used in communication and broadcast systems around the world. It can be mounted on roof top of any house or commercial building containing businesses and their offices. It helps improve telecommunication access to cell phone tower signals for boosters, amplifiers or other wireless telecom devices installed inside. It provides high front-to-back ratio for point-to-point relay systems and applications as well as for GSM cellular repeaters, MAS and ISM systems. It is horizontally or vertically polarized. It has 50 Ohm impedance with N female connector terminal. This is a directional Log Periodic Antenna, also known as Yagi antenna, which transmits powerfully in one direction. It is designed for using outdoors with any 50 Ohm 2G, 3G, 4G and LTE cellular signal amplifier or repeater. It is compatible with most 50 Ohm cell phone repeaters and boosters including Uniden, Hiboost, SureCall and Wilson Electronics or weBoost. Fabricated from seamless drawn aluminum tubing and extruded pipe and heavy aluminum castings, gold anodized for corrosion protection, plus stainless steel hardware and fastenings. Foam filled broadband feed assembly requires no pressurization and can be easily replaced if necessary. Features. Reflector Grid Improves Gain, Front to Back Ratio and Return Loss. Compatible With 50 Ohm Cell Phone Repeaters, Amplifiers and Boosters. Covers 890-960 MHz. High Efficiency and High Gain. Operates in any weather. All Carrier Operation. Stadiums, Warehouses and DAS Systems. N-Female Connector (50 Ohm). Specifications: Frequency Range 890—960 MHz Gain 18 dBi Impedance 50 ohms VSWR < 1.5:1 Polarization Horizontal or vertical Front-to-back ratio > 23 dB Maximum input power 100 watts (at 50°C) H-plane beamwidth 12 degrees (half-power) E-plane beamwidth 24 degrees (half-power) Connector N female Fits Type 400 Cable with N-Male Connector Weight 38 lb. Dimensions 68 x 36 x 18 inches Wind load at 93 mph (150 kph) Front / side 134 lbf / 72 lbf | 594 N / 320 N Wind survival rating* 100 mph (160 kph) Shipping dimensions 40 x 36 x 7 inches. Shipping weight 47 lb. Mounting Mounting kits available for masts of 2.375 to 4.5 inch (60 to 114 mm) OD. Compliance RoHS Certified directive: Lead (Pb) Free. ISO 9001, 14001 Certifications. * Mechanical design is based on environmental conditions as stipulated in TIA-222-G-2 (December 2009) and/or ETS 300 019-1-4 which include the static mechanical load imposed on an antenna by wind at maximum velocity. Horizontal pattern — V-polarization | Vertical pattern — H-polarization: Horizontal pattern — H-polarization | Vertical pattern — V-polarization: Compliance: Restriction of Hazardous Substances (RoHS) Directive: Lead-Free. ISO Certification 9001, 14001. Parabolic Antenna Rear View and Top View Dimensions Diagram: