Yocan UNI S Box Mod

The Yocan Uni S Box Mod is an upgrade from its successor the Uni Box Mod and Uni Pro Box Mod. This Uni S Box Mod features a durable metallic body upgrade giving it a premium feel. It also upgraded its charging technology to USB Type-C charging port with a corresponding USB Type-C charging cable. It's also designed with a hanging hole like any other Yocan vaporizers making the Yocan Uni S Box Mod more portable. It's also smaller and more compact compared to the former UNI models.  Features: Durable Metallic Body USB Type-C Charging Technology Preset Temperature Settings Low = 2.5V Medium = 3.0V High = 3.5V Small and Compact Build What's in the Box: 1 x Yocan UNI S Box Mod Vaporizer 1 x Magnetic Adapter 1 x USB-C Charging Cable 1 x User Manual Yocan Uni S Box Mod Manual   Powering the Yocan UNI S Box Mod Vaporizer Make sure to fully charge your Yocan Uni S Box Mod before use for best results. After the battery is charged, power the Yocan UNI S Box Mod Vaporizer on by pressing on the power button 5 times. Note: The power button is the squarish (octagon) button located at the upper part of the device right above the Yocan logo. How to Load the Yocan UNI S Box Mod Vaporizer Prepare your cartridges in flat surface to prevent it from rolling off the table. Grab the 510 magnetic adapter and connect it to your cartridge. Set the 510-threaded attachment from your cartridge to the receiving end of the magnetic adapter. Twist the magnetic adapter until tight. Note: Do not over tighten the magnetic adapter as it may cause the threads to get loose. This may cause other cartridges to experience a loose connection affecting the flow of electricity and the overall performance of the Yocan UNI S Box Mod Vaporizer. Once you have connected the adapter to the cartridge, you may insert the cartridge down to the Yocan Uni S Box Mod chamber until it snaps. How to Vape the Yocan UNI S Box Mod Vaporizer Make sure the Yocan UNI S Box Mod Vaporizer is fully charged and loaded with your selected cartridge before you start vaping. Press and hold the power button while placing your lips onto the mouthpiece and prepare to draw. When the Yocan UNI S Box Mod Vaporizer starts producing vapor, inhale and pull from the mouthpiece. Repeat this process until e-liquids or oil is fully consumed. Selecting the Temperature Setting for the Yocan UNI S Box Mod Vaporizer Press the power button five times to power on the battery. Press the power button again three times to toggle through temperature settings: Heat Settings: Low – 2.5 volts Medium – 3.0 volts High – 3.5 volts Cleaning and Maintaining your Yocan UNI S Box Mod Vaporizer The new Yocan UNI S Box Mod Vaporizer consist of fewer parts making cleaning and maintaining a lot easier. Follow the steps below to keep your Uni clean and in good condition: Turn off the Yocan UNI S Box Mod Vaporizer by clicking the power button 5 times rapidly. Use a dry paper towel to wipe off any residue on the vaporizer. Always use the dedicated charger and follow the instructions to avoid damaging your Yocan UNI S  Box Mod Vaporizer.