Rosslare - MDW11GR - Wireless Access Control Door Interface - 24 V Power Supply

The MD-W11GR utilizes Bi-Directional RF data communication and Rolling Code protocol to relay Wiegand 26-bit and other formats including PIN code messages, lock, door relay, tamper, door monitor and REX signals between the Near and Far interface units. Features Bi-directional RF data communication Supports PIN codes and card formats, such as Wiegand 26 bit, 32 bit, and PIN code 6 bit Lock and door relay commands Tamper, door monitor, and REX messages between the controller and the interface unit Rolling Code to increase security Four different RF channels to prevent collisions Built-in charger for up to 12VDC, 7Ah backup battery on the Far unit Transfers proximity card information and LED control, reader tamper, lock relay commands, REX, and door monitor events between the coupled units. Suitable for indoor use. Available in 869 MHz (H) and 433.92 MHz (G) bands The NEAR unit is powered from the controller's power supply. TheFAR unit is powered by a local wall transformer. A built-incharger provides battery backup. Input Voltage 12-24 AC / 15-24 VDC Battery Charger 12V sealed Lead-Acid, up to 7Ah (Far Unit) Input Current Standby: 70mAh Max: 160mA Max Range 300 meters (985 feet) Response Time Up to 500ms with Rosslare’s AC-215 controller and reader. Output Relays 5A Form C relay Communications Bi-directional RF, narrow band. Fast anti-collision, rolling code protocol with data protection. Operating Environment Indoor Use Operating Temperature -10°C to 50°C (14°F to 122°F) Dimensions 13 x 8.7 x 3.2 cm / 5.1 x 3.42 x 1.26 inch Downloads:Installation Instructions