DMX512 Dim Multi-Current Driver 10W (DIP Adjustment)

The dmx512 dimmable led driver has a built-in active PFC function, PF≥0.95, constant current operating mode, working efficiency up to 76%, plastic housing design, suitable for indoor lighting projects, with a 7-year warranty [Custom Product Tab] Input with ULO-126 terminals 3P: Live Wire AC (L), Neutral Wire AC(N) Output LED SEC with ULO-381terminals 2P: output Positive (LED+), output negative (LED-). Connected to LED Lamps. Suggested wire diameter: Input 0.75-2mm2; Output:0.5-2mm2.   Note: Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.   ■ Dimming Operation and Connecting Diagram  DMX512 dimming: Input terminal with 3P;  Live Wire(L) , Neutral Wire (N)  . Note: vacant for middle terminal Outputterminals with 5P;  LED SEC positive (LED+), LED negative (LED-). Connected to LED light; Common anode design 3P for DIM (DMX512) dimming;    Please make sure you connect these correctly ,otherwise your product will not workcorrectly and could be damage   ■ DMX512 address setting Operation    The default address for our DMX LED driver is 001. Address settings device:   Address settings: ① RDM setting address: Set the address by the RDM device. For detailed operation, please refer to RDM device instruction manual.    ② NFC setting address: The DMX address can be read and written by a mobile with NFC APP or NFC handheld device (NFC read & write device: NFC-RW) by close to the NFC signal area of the DMX512 driver.   ■ Setting Operation Steps:  Simple operation about DMX512 address reset and adjusting output voltage slighting by a mobile with NFC APP or NFC handheld device (NFC read & write device: NFC-RW)     [/Custom Product Tab]