DALI & Push Dimmable CV LED driver 100w

Dali dimming led driver 100W 12V waterproof ip67, passed the CE certification, is very popular in the European market, high PF>0.9, high efficiency>88% design makes this power supply high quality, with a 7-year warranty, can protect the 100W LED modules for longer time Model SMT-012-100VMH SMT-024-100VMH Output DC Voltage 12V 24V Voltage Tolerance ±0.5V Voltage Regulation ±0.5% Rated current 8.33A 4.16A Rated power 100W Load Regulation ±0.2% Input Voltage Range 100-265VAC Frequency Range 47 - 63Hz Power Factor(Typ.)@ full load PF≥0.99 / 120VAC  PF≥0.98/ 230VAC  (Full loading) THD(Typ.)@ full load <15% Efficiency(Typ.)@ full load 87% 86% AC Current(Max.) 1.16A 1.17A Inrush Current (Typ.) 13.2A/120VAC  59A/230VAC Leakage current <0.5mA Protection Short Circuit constant current mode, recover automatically after fault condition is removed Over Load ≤120% constant current limiting, recover automatically after fault condition is removed Over temperature 100℃±10℃ Shut down o/p voltage, recovers automatically after temperature goes down Protection Class Ⅰ Environment Working TEMP. -40~+60℃ (see below derating curve) Working Humidity 20 - 95%RH ,non-condensing  Storage TEM.,Humidity -40 - +80℃,10 - 95%RH TEMP.coefficient ±0.03%/℃(0 - 50℃) Vibration 10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes  Safety&EMC Safety standards EN61347-1 EN61347-2-13 IP67 Withstand voltage I/P-O/P:3.75KVAC  I/P-FG:1.88KVAC  O/P-FG:0.5KVAC  Isolation resistance I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH   EMC Emission EN55015   EN61000-3-2 ,EN61000-3-3 EMC Immunity EN61000-4-2,3,4,5,6 ,11,   EN61547 Others Weight 1.1Kg  Dimension 210*70*43mm(L*W*H) packing 340*275*170mm/10pcs /CTN Notes 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature. 2. Tolerance: includes set up tolerance, line regulation and load regulation . 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. [Custom Product Tab]  ■ Input & Output wiring Input Rubber cable 3*0mm²,the green/yellow cable connect with (FG) ,Brown with AC (L),Blue with AC(N)   Output rubber cable2*1.0mm² , Red is output ( V+) Positive,Black is output (V-) Connected to LED Lamps. ■ Dimming wiring Dimming Rubber cable2*75mm², Blue DA/N and White DA/L (No polar) connected to the DALI BUS when use DALI function .   Blue (N) and Brown (L) connect to AC (N) and Push dim switch dimmer( L) when use Push function. Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged. Note:   Any other requests we can customize. [/Custom Product Tab]