
DALI & Push Dimmable CV LED driver 150w
SMARTS 150W DALI dimmable led driver has passed the CE certification, the waterproof grade is ip67, the aluminum shell has good waterproof performance, and the input voltage is 100-265vac. It is mainly sold in Europe. The constant voltage working mode makes it possible to match 150W LED downlight Smooth dimming Model SMT-012-150VMH SMT-024-150VMH Output DC Voltage 12V 24V Voltage Tolerance ±0.5V Voltage Regulation ±0.5% Rated current 12.5A 6.25A Rated power 150W Load Regulation ±0.2% Input Voltage Range 100-265VAC Frequency Range 47 - 63Hz Power Factor(Typ.)@ full load PF≥0.99 / 120VAC PF≥0.96/ 230VAC (Full loading) THD(Typ.)@ full load <20% Efficiency(Typ.)@ full load 88% 88% AC Current(Max.) 1.72A 1.72A Inrush Current (Typ.) 16A/120VAC 56A/230VAC Leakage current <0.5mA Protection Short Circuit constant current mode, recover automatically after fault condition is removed Over Load ≤120% constant current limiting, recover automatically after fault condition is removed Over temperature 100℃±10℃ Shut down o/p voltage, recovers automatically after temperature goes down Protection Class Ⅰ Environment Working TEMP. -40~+60℃ (see below derating curve) Working Humidity 20 - 95%RH ,non-condensing StorageTEM.,Humidity -40 - +80℃,10 - 95%RH TEMP.coefficient ±0.03%/℃(0 - 50℃) Vibration 10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes Safety&EMC Safety standards EN61347-1 EN61347-2-13 IP67 Withstand voltage I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC Isolation resistance I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH EMC Emission EN55015 EN61000-3-2 ,EN61000-3-3 EMC Immunity EN61000-4-2,3,4,5,6 ,11, EN61547 Others Weight 1.2Kg Dimension 245*70*43mm(L*W*H) packing 320*270*170mm/10pcs /CTN Notes 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature. 2. Tolerance: includes set up tolerance, line regulation and load regulation . 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. [Custom Product Tab] ■ Input & Output wiring Input Rubber cable 3*0mm²,the green/yellow cable connect with (FG) ,Brown with AC (L),Blue with AC(N) Output rubber cable2*1.5mm² , Red is output ( V+) Positive,Black is output (V-) Connected to LED Lamps. ■ Dimming wiring Dimming Rubber cable2*75mm², Blue DA/N and White DA/L (No polar) connected to the DALI BUS when use DALI function . Blue (N) and Brown (L) connect to AC (N) and Push dim switch dimmer( L) when use Push function. Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged. Note: Any other requests we can customize. [/Custom Product Tab]