ELV/Triac Dimmable J-BOX Electronic Transformer 60W

12v/24v 60W triac dimmable led electronic transformer UL certification Class 2 Type HL, integrated design of junction box and power supply, small size 128*120.5*42mm easy and fast connection, Suitable for residential and commercial lighting projects Part Number SET-12060J SET-24060J Output Spec.: Reted Power 60W 60W Reted Voltage 12V 24V Reted Current 5A 2.50A Voltage Tolerance ±0.5V Voltage Regulation ±0.5% Load Regulation ±1% Input Spec.: Voltage Range 120V Frequency Range 47-63HZ Efficiency(Typ.) 87%@120VAC Total Harmonic Distortion THD< 20%(@100% load) Power Factor(typ.) 0.98@120VAC AC Current(Typ.) 0.58A Inrush Current(Typ.) - Leakage Current <0.5mA/ 120VAC PROTECTION: Short Circuit Hiccup mode, recovers automatically after fault condition is removed. Over Load Hiccup mode, recovers automatically after fault condition is removed. ENVIRONMENT: Working Temp. Tcase=-40 ~ +60 (Please refer to“OUTPUTLOAD vs TEMPERATURE”section) Working humidity 20 ~ 95% RH non-condensing Storage temp., Humidity -40 ~ +90, 10 ~ 95% RH Temp .coefficient ±0.03%/℃(0~50℃) Vibration 10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes SAFETY & EMC: Safety standards UL8750, Class 2 Safety standards I/P-O/P:1.88KVAC OTHERS: Dimension 5.03x4.74x1.65 inch (L*W*H) Packing - [Custom Product Tab]  Mounting 1.This driver must be installed in a well-ventilated area free from explosive gases and vapors. Air circulation is essential for heat dissipation. 2.Recommended spacing between LED drivers should be a minimum of 4” (10cm). 3.Do not mount driver close to or above objects that can radiate heat. Vertical mounting is highly recommended. 4.Select an appropriate location that is able to support the weight of the product. 5.Use the mounting tabs on the left and right side of the driver to mount the product. ConnectionPreparation InputConnections & Grounding OutputConnections Wiring Diagram [/Custom Product Tab]