5 in 1 Dimmable LED Driver 120W (Standard Size)

The smarts 5 in 1 dimmable 24v 120w waterproof led dimming driver Passed UL certification, Sold to the North American market. This driver can perform smooth dimming without flickering, is very stable. model SMT-012-120VTD SMT-024-120VTD Output DC Voltage 12V 24V Voltage Tolerance ±0.5V Voltage Regulation ±0.5% Rated current 10.00A 5.0A Rated power 120W 120W Load Regulation ±2 % ±1 % Input Voltage Range 100~277VAC Frequency Range 47~63HZ THD(Typ.) @full load <20%@120VAC &277VAC Power Factor ( Typ.) 0.99@120VAC   0.96@277VAC 0.98@120VAC   0.95@277VAC Full Load Efficiency(Typ.) 82%@120VAC   83%@277VAC 82%@120VAC   84%@277VAC AC Current(Typ.) 1.7A Inrush Current (Typ.) 20A, 50%, 1.6ms @120VAC;   25A, 50% 1.2ms @277VAC Leakage current <0.5mA  Protection Short Circuit shut down o/p voltage, re-power on to recover after fault condition removed Over Loading ≤120% constant current limiting, auto-recovery Over temperature 100℃±10℃ shut down o/p voltage, automatically recover after cooling. Environment Working TEMP. -40~+60℃ Working Humidity 20~90%RH,non-condensing Storage TEM.,Humidity -40~+80℃,10~95%RH TEMP.coefficient ±0.03%/℃(0~50℃) Vibration 10~500Hz,2G 10min./1 cycle,period for 60min.each along X,Y,Z  axes Safety&EMC Safety standards UL8750 , CAN/CSA-C22.2 No.250.13   Withstand voltage I/P-O/P:1.88KVac  Isolation resistance I/P-O/P:100MΩ/500VDC/25℃/70%RH  EMC EMISSION FCC 47 CFR Part 15 ,Subpart B Others Net Weight 1.1Kg Size 230*70*43mm(L*W*H)     packing Carton size: 340*275*170mm , 10PCS/ctn Notes 1. All parameters NOT specially mentioned are measured at 120VAC input , rated load and 25℃of ambient temperature. 2. Tolerance: includes set up tolerance, line regulation and load regulation . 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the finalequipment manufactures must be-qualify EMC Directive on the complete installation again. [Custom Product Tab] Dimming Operation and Connecting Diagram ¡ùUsing two ways of dimming at the same time, you must be assured that LED lighting is up to the max. Brightness then you could operate with the other dimming; ¡ùUsing one dimming ---TRIAC/Phase cut dimming 1.The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase /Triac dimmer of lighting system.2.Working with forward phase /leading edge ,MLV and Reverse phase /trailing edge ,ELV,TRIAC dimmers 3.Min loading is about 10%4.Please try to use dimmers with power at least 1.5 times as the output power of the driver. [/Custom Product Tab]